Difference between revisions of "Electric machines"
From ONELAB
(→Additional information) |
(→Additional information) |
||
| Line 4: | Line 4: | ||
The example contains: | The example contains: | ||
| − | * '''pmsm.pro''': an eight-pole permanent magnet synchronous machine from GRUCAD, Universidade Federal de Santa Catarina, Brazil <ref>M. V. Ferreira da Luz, P. Dular, N. Sadowski, C. Geuzaine, and J. P. A. Bastos, [http://orbi.ulg.ac.be/handle/2268/22771 "Analysis of a Permanent Magnet Generator With Dual Formulations Using Periodicity Conditions and Moving Band"], IEEE Trans. Mag., Vol 38, No. 2, pp. 961-964, 2002.</ref> | + | * '''pmsm.pro''' and '''pmsm_cbmag.pro''': an eight-pole permanent magnet synchronous machine from GRUCAD, Universidade Federal de Santa Catarina, Brazil (the geometry of '''pmsm''' is a simplified version of '''pmsm_cbmag''')<ref>M. V. Ferreira da Luz, P. Dular, N. Sadowski, C. Geuzaine, and J. P. A. Bastos, [http://orbi.ulg.ac.be/handle/2268/22771 "Analysis of a Permanent Magnet Generator With Dual Formulations Using Periodicity Conditions and Moving Band"], IEEE Trans. Mag., Vol 38, No. 2, pp. 961-964, 2002.</ref> |
| − | + | <ref> J. Gyselinck, N. Sadowski, P. Dular, M. V. Ferreira da Luz, J. P. A. Bastos, and W. Legros, [http://beams.ulb.ac.be/biblio/harmonic-balance-finite-element-modelling-of-a-permanent-magnet-synchronous-machine-0 "Harmonic Balance Finite Element Modelling of a Permanent-Magnet Synchronous Machine"], Proceedings of CBMag 2002.</ref><ref>J. Gyselinck, P. Dular, L. Vandevelde and J. Melkebeek, A.M. Oliveira and P. Kuo-Peng, [http://www.emeraldinsight.com/journals.htm?articleid=1455338 "Two-dimensional harmonic balance finite element modelling of electrical machines taking motion into account"], COMPEL, Vol. 22, No. 4, pp. 1021-1036, 2003.</ref> | |
* '''lomonova.pro''': an eight-pole permanent magnet machine <ref>E.A. Lomonova, E. Kazmin, Y. Tang, J.J.H. Paulides, [http://www.emeraldinsight.com/journals.htm?articleid=1906093 "In-wheel PM Motor: Compromise between High Power Density and Extended Speed Capability"], COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, Vol. 30, No. 1, pp. 98-116, 2011.</ref> | * '''lomonova.pro''': an eight-pole permanent magnet machine <ref>E.A. Lomonova, E. Kazmin, Y. Tang, J.J.H. Paulides, [http://www.emeraldinsight.com/journals.htm?articleid=1906093 "In-wheel PM Motor: Compromise between High Power Density and Extended Speed Capability"], COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, Vol. 30, No. 1, pp. 98-116, 2011.</ref> | ||
* '''wfsm_4p.pro''': a four-pole wound field synchronous machine <ref> J. Gyselinck, L. Vandevelde, J. Melkebeek, W. Legros, [http://hdl.handle.net/2013/ULB-DIPOT:oai:dipot.ulb.ac.be:2013/73097 "Steady-State Finite Element Analysis of a Salient-Pole Synchronous Machine in the Frequency Domain"], Proceedings Electrimacs 2002, Montréal, Canada, August 18-21, 6 p.</ref> | * '''wfsm_4p.pro''': a four-pole wound field synchronous machine <ref> J. Gyselinck, L. Vandevelde, J. Melkebeek, W. Legros, [http://hdl.handle.net/2013/ULB-DIPOT:oai:dipot.ulb.ac.be:2013/73097 "Steady-State Finite Element Analysis of a Salient-Pole Synchronous Machine in the Frequency Domain"], Proceedings Electrimacs 2002, Montréal, Canada, August 18-21, 6 p.</ref> | ||
* '''t30.pro''': induction motor with solid rotor <ref> [http://www.compumag.org/jsite/team.html International TEAM Workshop Problem 30a - Induction Motor Analyses], Kent Davey</ref> | * '''t30.pro''': induction motor with solid rotor <ref> [http://www.compumag.org/jsite/team.html International TEAM Workshop Problem 30a - Induction Motor Analyses], Kent Davey</ref> | ||
| − | * '''im_3kw.pro''': induction | + | * '''im_3kw.pro''': induction machine |
* '''im.pro''': a four-pole induction machine <ref>S. Guérard, J. Gyselinck, and J. Lecomte-Beckers,[http://hdl.handle.net/2268/38463 "Finite element modelling of an asynchronous motor with one broken rotor bar, comparison with the data recorded on a prototype and material aspects"], Bulletin Scientifique de l'AIM, Vol.1, pp. 13-22, 2005. | * '''im.pro''': a four-pole induction machine <ref>S. Guérard, J. Gyselinck, and J. Lecomte-Beckers,[http://hdl.handle.net/2268/38463 "Finite element modelling of an asynchronous motor with one broken rotor bar, comparison with the data recorded on a prototype and material aspects"], Bulletin Scientifique de l'AIM, Vol.1, pp. 13-22, 2005. | ||
Prix Melchior Salier 2004 du meilleur travail de fin d'études section électromécanique-énergétique.</ref> | Prix Melchior Salier 2004 du meilleur travail de fin d'études section électromécanique-énergétique.</ref> | ||
Revision as of 15:45, 17 July 2013
|
2D models of electric machines: permanent magnet and wound field synchronous machines, induction machines, switched reluctance machine.
|
 
|
|---|
|
Download model archive (machines.zip) |
Additional information
The example contains:
- pmsm.pro and pmsm_cbmag.pro: an eight-pole permanent magnet synchronous machine from GRUCAD, Universidade Federal de Santa Catarina, Brazil (the geometry of pmsm is a simplified version of pmsm_cbmag)[1]
- lomonova.pro: an eight-pole permanent magnet machine [4]
- wfsm_4p.pro: a four-pole wound field synchronous machine [5]
- t30.pro: induction motor with solid rotor [6]
- im_3kw.pro: induction machine
- im.pro: a four-pole induction machine [7]
References
- ↑ M. V. Ferreira da Luz, P. Dular, N. Sadowski, C. Geuzaine, and J. P. A. Bastos, "Analysis of a Permanent Magnet Generator With Dual Formulations Using Periodicity Conditions and Moving Band", IEEE Trans. Mag., Vol 38, No. 2, pp. 961-964, 2002.
- ↑ J. Gyselinck, N. Sadowski, P. Dular, M. V. Ferreira da Luz, J. P. A. Bastos, and W. Legros, "Harmonic Balance Finite Element Modelling of a Permanent-Magnet Synchronous Machine", Proceedings of CBMag 2002.
- ↑ J. Gyselinck, P. Dular, L. Vandevelde and J. Melkebeek, A.M. Oliveira and P. Kuo-Peng, "Two-dimensional harmonic balance finite element modelling of electrical machines taking motion into account", COMPEL, Vol. 22, No. 4, pp. 1021-1036, 2003.
- ↑ E.A. Lomonova, E. Kazmin, Y. Tang, J.J.H. Paulides, "In-wheel PM Motor: Compromise between High Power Density and Extended Speed Capability", COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, Vol. 30, No. 1, pp. 98-116, 2011.
- ↑ J. Gyselinck, L. Vandevelde, J. Melkebeek, W. Legros, "Steady-State Finite Element Analysis of a Salient-Pole Synchronous Machine in the Frequency Domain", Proceedings Electrimacs 2002, Montréal, Canada, August 18-21, 6 p.
- ↑ International TEAM Workshop Problem 30a - Induction Motor Analyses, Kent Davey
- ↑ S. Guérard, J. Gyselinck, and J. Lecomte-Beckers,"Finite element modelling of an asynchronous motor with one broken rotor bar, comparison with the data recorded on a prototype and material aspects", Bulletin Scientifique de l'AIM, Vol.1, pp. 13-22, 2005. Prix Melchior Salier 2004 du meilleur travail de fin d'études section électromécanique-énergétique.
|
Models developed by R. Sabariego, J. Gyselinck and C. Geuzaine. This work was funded in part by the Walloon Region (WBGreen No 1217703 FEDO, WIST3 No 1017086 ONELAB) and by the Belgian Science Policy (IAP P7/02). Copyright (c) 2012-2015 ULg-ULB.
|
