Electric machines
|
2D models of electric machines: permanent magnet and wound field synchronous machines, induction machines, switched reluctance machine.
|
 
|
|---|
|
Download model archive (machines.zip) |
Additional information
- Eight-pole permanent magnet synchronous machine - GRUCAD, Universidade Federal de Santa Catarina, Brazil
Used in:
"Analysis of a Permanent Magnet Generator With Dual Formulations Using Periodicity Conditions and Moving Band", M. V. Ferreira da Luz, P. Dular, N. Sadowski, C. Geuzaine, and J. P. A. Bastos IEEE Trans. Mag., Vol 38, No. 2, pp. 961-964.
- Eight-pole permanent magnet synchronous machine - GRUCAD, Universidade Federal de Santa Catarina, Brazil
Same machine as previous one, but geometry has not been simplified here. Used in: "Harmonic Balance Finite Element Modelling of a Permanent-Magnet Synchronous Machine" J. Gyselinck, N. Sadowski, P. Dular, M. V. Ferreira da Luz, J. P. A. Bastos, and W. Legros Proceedings of CBMag 2002.
"Two-dimensional harmonic balance finite element modelling of electrical machines taking motion into account" J. Gyselinck, P. Dular, L. Vandevelde and J. Melkebeek, A.M. Oliveira and P. Kuo-Peng COMPEL, Vol. 22, No. 4, 2003, pp. 1021-1036.
- Eight-pole permanent magnet machine
Model from: E.A. Lomonova, E. Kazmin, Y. Tang, J.J.H. Paulides, (2011) "In-wheel PM Motor: Compromise between High Power Density and Extended Speed Capability", COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, 30(1), pp. 98-116. Work presented at Ecologic Vehicles-Renewable Energies (EVRE), Monaco, March 26-29, 2009
With Concentrated or distributed windings (different parameters for the geometry)
- Four-pole wound field synchronous machine
Used in: "Steady-State Finite Element Analysis of a Salient-Pole Synchronous Machine in the Frequency Domain",
J. Gyselinck, L. Vandevelde UGent, J. Melkebeek, W. Legros, Proceedings Electrimacs 2002, Montréal, Canada, August 18-21, 2002, 6 p.
- Four-pole induction machine
Used in: "Finite element modelling of an asynchronous motor with one broken rotor bar, comparison with the data recorded on a prototype and material aspects" S. Guérard, J. Gyselinck, and J. Lecomte-Beckers, Prix Melchior Salier 2004 du meilleur travail de fin d'études section électromécanique-énergétique, Rev. AIM 2005
