Difference between revisions of "Magnetodynamics with cohomology conditions"

From ONELAB
Jump to: navigation, search
Line 165: Line 165:
 
=== Result ===
 
=== Result ===
  
Real and imaginary part of the current density $\vec{j}$ in the conducting region $M_c$:
+
Real and imaginary part of the current density $\vec{j}$ in the conducting subdomain $M_c$:
 +
 
 
[[File:indheatjr.jpg|500px|frameless|alt=Current real part|Real part of the current density in the conducting regions.]]
 
[[File:indheatjr.jpg|500px|frameless|alt=Current real part|Real part of the current density in the conducting regions.]]
 
[[File:indheatji.jpg|500px|frameless|alt=Current imaginary part|Imaginary part of the current density in the conducting regions.]]
 
[[File:indheatji.jpg|500px|frameless|alt=Current imaginary part|Imaginary part of the current density in the conducting regions.]]

Revision as of 17:26, 27 January 2013

\(\renewcommand{\vec}[1]{\mathbf{#1}} \newcommand{\Grad}[1]{\mathbf{\text{grad}}\,{#1}} \newcommand{\Curl}[1]{\mathbf{\text{curl}}\,{#1}} \newcommand{\Div}[1]{\text{div}\,{#1}} \newcommand{\Real}[1]{\text{Re}({#1})} \newcommand{\Imag}[1]{\text{Im}({#1})} \newcommand{\pvec}[2]{{#1}\times{#2}} \newcommand{\psca}[2]{{#1}\cdot{#2}} \newcommand{\E}[1]{\,10^{#1}} \newcommand{\Ethree}{{\mathbb{E}^3}} \newcommand{\Etwo}{{\mathbb{E}^2}} \newcommand{\Units}[1]{[\mathrm{#1}]} \)Here we represent an induction heating eddy current problem that utilizes the homology and cohomology solver of Gmsh.

Problem definition

The domain

File:Indheatdomain.jpg
Topology of the modeling domain.

Let $M \subset \mathbb{R}^3$ and let $\partial M = S_1 \cup S_2$ so that $\partial S_1 = \partial S_2 = S_1 \cap S_2$ denote the 3D modeling domain and its 2D boundary that is decomposed in two parts. Furthermore, the domain $M$ is decomposed in a conducting subdomain $M_c$ and a non-conducting subdomain $M_a$ so that $M = M_c \cup M_a$ and $M_c \cap M_a = \partial M_c \cap \partial M_a$ hold. We assume that $M$ is connected and has no holes nor voids, i.e. its Betti numbers are $b_0(M)$ = 1 and $b_1(M) = b_2(M) = 0$.

The conducting subdomain $M_c$ consists of two parts: The workpiece being heated is a hollow cylinder around which the inductor coil wraps. The terminals of the inductor coil extend to the boundary $\partial M$ of the domain.

The boundary value problem

We solve time harmonic magnetoquasistatic approximation to the Maxwell's equations in $M$:

\begin{align} \Curl{\vec{h}} &= \vec{j}, & \Curl{\vec{e}} + i \omega \vec{b} &= 0 , \\ \Div{\vec{j}} &= 0 , & \Div{\vec{b}} &= 0, \\ \end{align} with constitutive equations \begin{align} \vec{b} &= \mu \vec{h} , & \vec{e} &= \rho \vec{j} . \end{align}

File:Indheatdomaincond.jpg
Applied boundary conditions.

In order to treat the domain $M$ as a circuit element, we apply magnetic isolation at its boundary $\partial M$. This is achieved by the boundary condition \begin{align} \vec{b} \cdot \vec{n} = 0 \textrm{ on } \partial M. \end{align}

In the non-conducting domain $M_a$ we have no currents: \begin{align} \Curl{\vec{h}} = 0 \textrm{ in } M_a, \end{align} and the current cannot pass from the conducting subdomain $M_c$ to the non-conducting subdomain $M_a$. Also, the current cannot pass through the boundary $\partial M$ to the non-conducting subdomain $M_a$. Thus, the conditions \begin{align} \vec{j} \cdot \vec{n} = 0 \textrm{ on } \partial M_a \cap \partial M_c \textrm{ and on } M_a \cap \partial M = S_2 \end{align} are required to hold at the interfaces. The terminals on $M_c \cap \partial M$ which connect the inductor coil to an external circuit are modeled as equipotential surfaces, i.e. as perfectly conducting surfaces. Thus, we apply a boundary condition \begin{align} \vec{e} \times \vec{n} = 0 \textrm{ on } M_c \cap \partial M = S_1 \end{align} on them.

File:Indheatdomaincoh.jpg
Curves and a surface over which the cohomology conditions are specified.

Note that the boundary $\partial M$ is now decomposed on two parts according to the boundary condition applied on it: $\partial M = S_1 \cap S_2$. On $S_1 = M_c \cap \partial M$ we have the condition $\vec{e} \times \vec{n} = 0$ and on $S_2 = M_a \cap \partial M$ we have the condition $\vec{j} \cdot \vec{n} = 0$. We can either drive the problem by the net current $I_s$ through the terminals, or by the net voltage difference $V_s$ between the terminals: \begin{align} \int_{\zeta} \vec{e} \cdot \mathrm{d} \vec{l} &= V_s, \\ \int_{\Sigma} \vec{j} \cdot \vec{n} \, \mathrm{d} a = \int_{\Sigma} \Curl{\vec{h}} \cdot \vec{n} \, \mathrm{d} a = \int_{\partial \Sigma} \vec{h} \cdot \mathrm{d} \vec{l} &= I_s, \\ \end{align} where $\zeta$ is a curve on $S_2$ between the terminals on $S_1$ and $\Sigma \subset M$ is a surface that isolates the terminals. The boundary $\partial \Sigma$ also lies on the part $S_2$ of the boundary of the domain. In addition, the fields $\vec{e}$ and $\vec{j}$ are linked by the constitutive equation $\vec{e} = \rho \vec{j}$. All these considerations hint a duality between the electric field $\vec{e}$ and the current density $\vec{j}$ and between the voltage and the current conditions.

A class $[\zeta]$ of curves on $S_2$ between the terminals on $S_1$ belong to so-called relative homology space $H_1(S_2, \partial S_2)$, while the class $[\partial \Sigma]$ of curves belong to a homology space $H_1(S_2)$. The integral conditions on fields $\vec{e}$ and $\vec{j}$ (or $\vec{h}$) fixing $V_s$ and $I_s$ are called cohomology conditions, since they consider integrals over an element of a homology space.

$T-\Omega$ potential formulation

In this formulation we solve for the magnetic field $\vec{h}$ in $M$ to obtain the current density $\vec{j} = \Curl{\vec{h}}$ in $M_c$. Let us denote by $N(M_a)$ the set of nodes in the mesh of $M_a$ and by $E(M_c / \partial M_c)$ the set of edges in $M_c$ that are not $\partial M_c$.

Denote by $\mathsf{n}_i$ nodal shape functions associated with the nodes of the mesh and by $\mathsf{e}_i$ edge elements associated with the edges of the mesh. By $\mathsf{E}_i$ we denote so-called 1-cohomology basis function, which is an integer combination of edge elements on $M$: $$ \mathsf{E}_i = \sum_j z^j_i \mathsf{e}_j $$ where the integer coefficient vector $\vec{z}_i$ is produced by the cohomology solver of Gmsh.

File:Indheati1.jpg
Cohomology basis function whose coefficient specifies the current in the inductor.
File:Indheati2.jpg
Cohomology basis function whose coefficient specifies the current in the workpiece

Now, the unknown magnetic field $\vec{h}$ is of the form $$ \vec{h} = \sum_{i \in N(M_a)} \phi_i \Grad{\mathsf{n}_i} + \sum_{i \in E(M_c / \partial M_c)} t_i \mathsf{e}_i + I_1 \mathsf{E}_1 + I_2 \mathsf{E}_2, $$ where the cohomology basis functions $\mathsf{E}_1$ and $\mathsf{E}_2$ are produced by the computation of the cohomology space $H^1(M_a)$ in Gmsh. That is, the function space from which we look for the approximate solution of $\vec{h}$ is spanned by nodal shape functions $\mathsf{n}_i$ of $M_a$, edge elements $\mathsf{e}_i$ of $M_c / \partial M_c$, and by the cohomology basis functions $\mathsf{E}_i$ of the cohomology space $H^1(M_a)$. Those functions shall also serve as the test functions in the following weak formulation.

The weak formulation is \begin{align} -\int_M \mu \vec{h} \cdot \vec{h}' \, \mathrm{d} V &= 0 \quad \forall \, \vec{h}' \\ \int_{M_c} \rho \Curl{\vec{h}} \cdot \Curl{\vec{h}} \, \mathrm{d} V + i \omega \int_M \mu \vec{h} \cdot \vec{h}' \, \mathrm{d} V &= - \int_{S_2} \vec{e} \times \vec{h}' \cdot \vec{n} \, \mathrm{d} a \quad \forall \, \vec{h}', \end{align} where $$ \int_{S_2} \vec{e} \times \vec{h}' \cdot \vec{n} \, \mathrm{d} a = \begin{cases} V_i & \textrm{ when } \vec{h}' = \mathsf{E}_i \\ 0 & \textrm{ otherwise. } \end{cases} $$ By plugging in the expression for $\vec{h}$ one can construct a linear system from which the unknown coefficients $\phi_i$, $t_i$ and $V_i$ or $I_i$ can be solved. Note that either $V_i$ or $I_i$ from both pairs $(V_1, I_1)$ and $(V_2, I_2)$ must be fixed in order to get a unique solution.

$A-V$ potential formulation

In this formulation we solve for the vector potential $\vec{a}$ of the magnetic flux density $\vec{b}$ in $M$ and for the curl-free part $\boldsymbol{\epsilon}$ of the electric field $\vec{e}$ in $M_c$ to obtain the current density $\vec{j} = \rho^{-1} \vec{e} = \rho^{-1} (i \omega \vec{a} + \boldsymbol{\epsilon})$ in $M_c$.

The unknown magnetic vector potential $\vec{a}$ is of the form $$ \vec{a} = \sum_{i \in E(M / \partial M)} a_i \mathsf{e}_i. $$ That is, the function space from which we look for the approximate solution of $\vec{a}$ is spanned by edge elements $\mathsf{e}_i$ of $M / \partial M$. Those functions shall also serve as the test functions in the following weak formulation.

File:Indheatv1.jpg
Cohomology basis function whose coefficient specifies the voltage across the inductor.
File:Indheatv2.jpg
Cohomology basis function whose coefficient specifies the voltage across the workpiece

The unknown curl-free part $\boldsymbol{\epsilon}$ of the electric field is of the form $$ \boldsymbol{\epsilon} = \sum_{i \in N(M_c / S_1)} \varphi_i \Grad{\mathsf{n}_i} + V_1 \mathsf{E}_1 + V_2 \mathsf{E}_2, $$ Where the cohomology basis functions $\mathsf{E}_1$ and $\mathsf{E}_2$ are produced by the computation of the relative cohomology space $H^1(M_c, S_1)$ in Gmsh. That is, the function space from which we look for the approximate solution of $\boldsymbol{\epsilon}$ is spanned by nodal shape functions $\mathsf{n}_i$ of $M_c / S_1$, and by the cohomology basis functions $\mathsf{E}_i$ of the cohomology space $H^1(M_c, S_1)$. Those functions shall also serve as the test functions in the following weak formulation.

The weak formulation is \begin{align} \int_M \mu^{-1} \Curl{\vec{a}} \cdot \Curl{\vec{a}}' \, \mathrm{d} V + \int_{M_c} \rho^{-1} \boldsymbol{\epsilon} \cdot \vec{a}' \, \mathrm{d} V + i \omega \int_{M_c} \rho^{-1} \vec{a} \cdot \vec{a}' \, \mathrm{d} V &= 0 \quad \forall \, \vec{a}' \\ \int_{M_c} \rho^{-1} \boldsymbol{\epsilon}' \cdot \boldsymbol{\epsilon}' \, \mathrm{d} V + i \omega \int_{M_c} \rho^{-1} \vec{a} \cdot \boldsymbol{\epsilon}' \, \mathrm{d} V &= - \int_{S_1} \vec{j} \varphi' \, \mathrm{d} a \quad \forall \, \boldsymbol{\epsilon}' \end{align} where $$ \int_{S_1} \vec{j} \varphi' \, \mathrm{d} a = \begin{cases} I_i & \textrm{ when } \boldsymbol{\epsilon}' = \mathsf{E}_i \\ 0 & \textrm{ otherwise. } \end{cases} $$ By plugging in the expressions for $\vec{a}$ and $\boldsymbol{\epsilon}$ one can construct a linear system from which the unknown coefficients $a_i$, $\varphi_i$, and $V_i$ or $I_i$ can be solved. Note that either $V_i$ or $I_i$ from both pairs $(V_1, I_1)$ and $(V_2, I_2)$ must be fixed in order to get a unique solution.

Cohomology conditions

In both formulations, if the cohomology basis function $\mathsf{E}_1$ corresponds to the net current $I_s$ or the net voltage $V_s$ in the inductor coil, $I_1 = I_s$ and $V_1 = V_s$ hold. If cohomology basis function $\mathsf{E}_2$ corresponds to the net current in the workpiece, one should set $V_2 = 0$. That is, one drives the problem by setting either the source current $I_s$ or the source voltage $V_s$, and the other quantity together with the net current $I_2$ in the workpiece are solved as part of the finite element solution.

The implementation below produces such cohomology basis functions $\mathsf{E}_1$ and $\mathsf{E}_2$ as described above.

Implementation

Indheat.geo: problem geometry and cohomology computation in Gmsh

ERROR in secure-include.php: /onelab_files/getdp/Magnetodynamics/GMSH_GETDP/indheat.geo does not look like a URL, and doesn't exist as a file.

Direct link to file `Magnetodynamics/GMSH_GETDP/indheat.geo'

Indheat.pro: weak formulation in GetDP

ERROR in secure-include.php: /onelab_files/getdp/Magnetodynamics/GMSH_GETDP/indheat.pro does not look like a URL, and doesn't exist as a file.

Direct link to file `Magnetodynamics/GMSH_GETDP/indheat.pro'

How to use

All the files (.geo and .pro) must be located in the same directory.

Meshing the domain and computing the cohomology

Go to the directory and then type:

gmsh indheat.geo -3

After the mesh is built, a file "indheat.msh" should have been created in the directory.

Solving the problem with GetDP

In a Terminal, type (in the right directory)

getdp indheat.pro -solve MagDynTOComplex -pos MagDynTO

to solve with $T-\Omega$ formulation, or

getdp indheat.pro -solve MagDynAVComplex -pos MagDynAV

to solve with $A-V$ formulation.

Showing the result

Open the file "jTO.pos" or "jAV.pos" with Gmsh by typing "gmsh jTO.pos" or "gmsh jAV.pos" in a terminal in the right directory.

Result

Real and imaginary part of the current density $\vec{j}$ in the conducting subdomain $M_c$:

Real part of the current density in the conducting regions. Imaginary part of the current density in the conducting regions.