Python

Any Python script can become a native ONELAB client by importing the onelab.py module.

Getting started

1. Download and uncompress a recent version of Gmsh, or the Gmsh/GetDP bundle for Windows64, Windows32, Linux64, Linux32 or MacOSX.
2. Double-click on the Gmsh executable (gmsh.exe
   Error creating thumbnail: Unable to save thumbnail to destination
   on Windows).
3. Load the Python script (.py file) through the File/Open menu, e.g. load the pend.py example given below.
4. Click on Run.
5. ... that's it!

How does it work?

The Python ONELAB interface is implemented in a single Python module: onelab.py. This module comes pre-installed with Gmsh, in the same directory as the Gmsh executable. When you open a ONELAB-enabled Python solver with Gmsh, Gmsh automatically finds the onelab.py module. You can also install onelab.py in any directory of your choosing; in this case don't forget to update your PYTHONPATH environment variable.

Example

The following example (a simple Python solver for the double pendulum problem) highlights the main features of the Python interface:

#!/usr/bin/env python
#coding=utf-8

# 1) launch "gmsh pend.py"
# 2) there is no 2... :-)

import onelab
import math, os

c = onelab.client(__file__)

def exportMsh(le1,le2):
   mshFile = open(c.getPath("pend.msh"), 'w')
   mshFile.write('$MeshFormat\n2.2 0 8\n$EndMeshFormat\n')
   mshFile.write('$Nodes\n3\n1 0 0 0\n2 0 %s 0\n3 0 %s 0\n$EndNodes\n' %(-le1, -le1-le2))
   mshFile.write('$Elements\n3\n1 1 2 0 1 1 2\n2 1 2 0 1 2 3\n3 15 2 0 2 3\n$EndElements\n')
   mshFile.close()

def exportMshOpt():
   optFile = open(c.getPath("pend.msh.opt"),'w')
   optFile.write('n = PostProcessing.NbViews - 1;\n')
   optFile.write('If(n >= 0)\nView[n].ShowScale = 0;\nView[n].VectorType = 5;\n')
   optFile.write('View[n].ExternalView = 0;\nView[n].DisplacementFactor = 1 ;\n')
   optFile.write('View[n].PointType = 1;\nView[n].PointSize = 5;\n')
   optFile.write('View[n].LineWidth = 2;\nEndIf\n')
   optFile.close()

def exportIter(iter,t,x1,y1,x2,y2):
   mshFile = open(c.getPath("pend.msh"),'a')
   mshFile.write('$NodeData\n1\n"motion"\n1\n\t%f\n3\n\t%d\n3\n' % (t, iter))
   mshFile.write('\t3\n\t1 0 0 0\n\t2 %f %f 0\n\t3 %f %f 0\n$EndNodeData\n' %(x1,y1,x2,y2))
   mshFile.close()

g = 9.8	# acceleration of gravity
m = 0.3 # mass of pendulum balls

l = c.defineNumber('Geom/arm length [m]', value=1.0)
time = c.defineNumber('Dyna/time [s]', value=0.0)
dt = c.defineNumber('Dyna/time step [s]', value=0.001)
tmax = c.defineNumber('Dyna/max time [s]', value=20)
refresh = c.defineNumber('Dyna/refresh interval [s]', value=0.1)
theta0 = c.defineNumber('Init/initial theta angle [deg]', value=10, 
                         attributes={'Highlight':'Pink'})
phi0 = c.defineNumber('Init/initial phi angle [deg]', value=180,
                       attributes={'Highlight':'Pink'})

# we're done if we are in the "check" phase
if c.action == 'check' :
   exit(0)

l1 = l;
l2 = l;
m1 = m;
m2 = m;
theta = theta0 / 180.*math.pi;
phi = phi0 / 180.*math.pi;
theta_dot = 0.0
phi_dot = 0.0
refr = 0.0
iter = 0
time = 0.0

while (time < tmax):
   delta = phi - theta
   sdelta = math.sin(delta)
   cdelta = math.cos(delta)
   theta_dot_dot = ( m2*l1*(theta_dot**2.0)*sdelta*cdelta
                     + m2*g*math.sin(phi)*cdelta
                     + m2*l2*(phi_dot**2.0)*sdelta
                     - (m1+m2)*g*math.sin(theta) )
   theta_dot_dot /= ( (m1+m2)*l1 - m2*l1*(cdelta)**2.0 )
   
   phi_dot_dot = ( -m2*l2*(phi_dot**2.0)*sdelta*cdelta
                    + (m1+m2)*(g*math.sin(theta)*cdelta
                               - l1*(theta_dot**2.0)*sdelta
                               - g*math.sin(phi)) )
   phi_dot_dot /= ( (m1+m2)*l2 - m2*l2*(cdelta)**2.0 )
   
   theta_dot = theta_dot + theta_dot_dot*dt
   phi_dot = phi_dot + phi_dot_dot*dt

   theta = theta + theta_dot*dt
   phi = phi + phi_dot*dt

   x1 =  l1*math.sin(theta)
   y1 = -l1*math.cos(theta)
   x2 =  l1*math.sin(theta) + l2*math.sin(phi)
   y2 = -l1*math.cos(theta) - l2*math.cos(phi)

   time += dt
   refr += dt

   exportMshOpt()

   if refr >= refresh:
      refr = 0
      c.setNumber(c.name + '/Progress', value=time, min=0, max=tmax, visible=0)
      c.setNumber('Dyna/time [s]', value=time)
      c.setNumber('Solu/phi', value=phi)
      c.addNumberChoice('Solu/phi', phi)
      c.setNumber('Solu/theta', value=theta)
      c.addNumberChoice('Solu/theta', theta)
      c.setNumber('Solu/phi dot', value=phi_dot)
      c.addNumberChoice('Solu/phi dot', phi_dot)
      c.setNumber('Solu/theta dot', value=theta_dot)
      c.addNumberChoice('Solu/theta dot', theta_dot)

      # ask Gmsh to refresh
      c.setString('Gmsh/Action', value='refresh')

      # stop if we are asked to (by Gmsh)
      if(c.getString(c.name + '/Action') == 'stop'):
         break;

      exportMsh(l1, l2)
      exportIter(iter, time, x1, y1+l1, x2, y2+l1+l2)
      c.mergeFile(c.checkPath('pend.msh'))
      iter += 1

c.setNumber(c.name + '/Progress', value=0)

Direct link to file `pendulum/pend.py'

To interact with ONELAB, the script must first import the onelab.py module:

<syntaxhighlight lang="python">

import onelab

</syntaxhighlight>

The script then creates a ONELAB client with:

<syntaxhighlight lang="python">

c = onelab.client()

</syntaxhighlight>

Creating the client connects the script to the onelab server, through a socket. New ONELAB variables can then be defined using defineNumber, e.g.:

<syntaxhighlight lang="python">

l = c.defineNumber('Geom/arm length [m]', value=1.0)

</syntaxhighlight>

When the script is run, if the parameter has not been previously defined, it takes the value provided in defineNumber and is sent to the ONELAB server. The "/" character in the variable name is interpreted as a path separator, and results in the creation of a sub-tree in the graphical user interface. If the script is re-run later, the value will be updated using the value from the server (unless it is labeled as readOnly: see below). When Gmsh runs a ONELAB client, the client can be run in two modes: check (to check the coherence of the ONELAB database and make adjustments if necessary) and compute (to perform the actual computation). In check mode the double pendulum client simply defines the ONELAB variables it wants to share with the server, then exits:

<syntaxhighlight lang="python">

if c.action == 'check' : exit(0)

</syntaxhighlight>

In all other modes (i.e. when c.action=='compute), the code enters a loop and performs the actual computation. During the computation the script can directly set a value in the ONELAB database with setNumber, as is done in the example with:

<syntaxhighlight lang="python">

c.setNumber('Solu/phi', value=phi)

</syntaxhighlight>

It can also ask the server to read a file with mergeFile:

<syntaxhighlight lang="python">

c.mergeFile(onelab.path(__file__, 'pend.msh'))

</syntaxhighlight>

Common parameter attributes

Here's the list of attributes available for all ONELAB parameters:

name=string

The name of the parameter in the ONELAB database, in the form of a "/"-separated path. The name attribute is mandatory to exchange the variable with the ONELAB server.

readOnly=0|1

If readOnly is set, the value cannot be changed server-side, and the value provided in the python script is always used

visible=0|1

Should the parameter be visible in the interface?

help=string

Help string for this parameter

label=string

Alternative label used in the graphical user interface, replacing the part of "Name" located after the last "/"

Other attributes can be specified using the generic attribute' dictionary, e.g. ;attribute={'Highlight':'string'}. See ONELAB Syntax for Gmsh and GetDP for a list of all other attributes.

Number attributes

In addition, numbers can take the following specific attributes:

min=number

Minimum value allowed when scrolling in the interface, and when looping on the parameter

max=number

Maximum value allowed when scrolling in the interface, and when looping on the parameter

step=number

Step value used when scrolling in the interface, and when looping on the parameter

choices={number, number, ...}

Possible choices for the parameter

labels={number:string, number:string, ...}

Possible choices for the parameter, with string labels for each choice

String attributes

String accepts the following specific attributes:

kind=string

Mutable kind of the string (currently: "file")

choices={string, string, ...}

Possible choices for the parameter