[Getdp] Piecewise defined source current density

[Ruth V. Sabariego]

Hi Wolfgang,
I've slightly modified the support of the basis function for the 
formulation with a 'reference region', that I have also included in your 
problem definition.
It is the new convention. You should be able to get a result now.
Regards,
Ruth


Wolfgang Suttrop wrote:
> Dear all,
>
> I am trying to solve the "Team workshop problem 7" benchmark [H. 
> Tsuboi et al., J. Materials Processing Technology 108 (2001) 237-240]. 
> This is very similar to the 3D magnetodynamic example, except mu_r=1 
> everywhere, the passive conductor is multiply connected (which does 
> not bother me as yet) and the stranded inductor has a racetrack-shaped 
> cross section rather than a circular one. Because of this latter 
> condition I find it convenient to define the source current density 
> piecewise, on straight and curved volumes in the inductor. The 
> calculated (magnetostatic) source field {hs} and source current {d hs} 
> look reasonable to me.
>
> When trying to preprocess the magnetodynamic problem ("getdp Team7.pro 
> -msh Team7.msh -pre MagDyn_hphi", all files attached), I get an error  
> message:
>   "Error ('MagDyn_hphi_Bob.pro' line 142): Bad correspondance between 
> Group and Entity (#BF 1, #Global 8)".
> This error does not occur, if I give up piecewise definition but 
> define js0 (with circular symmetry, i.e. wrong) on the single inductor 
> domain ("Coil").
>
> I think I am making a stupid mistake somewhere, but from the 
> (otherwise very nice and helpful) getdp manual and examples I can't 
> quite make out where. Any hint is greatly acknowledged! Thanks in 
> advance ...
>
> Greetings,
> Wolfgang Suttrop
>
> _______________________________________________
> getdp mailing list
> getdp at geuz.org
> http://www.geuz.org/mailman/listinfo/getdp


-- 
Dr. Ir. Ruth V. Sabariego
University of Liege, Institut Montefiore,
Dept. of Electrical Engineering & Computer Science, 
Applied & Computational Electromagnetics (ACE),
Sart Tilman Campus, Grande Traverse, 10 (B28), B-4000 LIEGE, Belgium
phone: +32-4-3663737 -- fax: +32-4-3662910 -- http://elap.montefiore.ulg.ac.be/

-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: Team7.pro
URL: <http://www.geuz.org/pipermail/getdp/attachments/20090220/65a6b460/attachment.pro>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: MagDyn_hphi_Bob.pro
URL: <http://www.geuz.org/pipermail/getdp/attachments/20090220/65a6b460/attachment-0001.pro>