[Getdp] Problem with induction heat geometry

[Matti Pellikka]

Hi Stefan,

The cohomology computation commands on those lines didn't make it to
the current release version 2.6.1 of Gmsh. However, those commands
should be available in tomorrow's nightly builds of the development
version.

Alternatively, you can compile the current development version by
yourself, check that the build option ENABLE_KBIPACK is ON to enable
the cohomology computation.

I suspect that you also need the latest development version of GetDP
to compute the example.

-- 
Matti Pellikka, Researcher
Tampere University of Technology, Electromagnetics

On 27 January 2013 00:57,  <stefan.braun at smartcae.de> wrote:
> Hello Group Members,
> i want to try out a example of onelab.info about induction heating.
>
> If i import the *.geo file in gmsh i get the following error messages.
>
> http://onelab.info/files/getdp/Magnetodynamics/GMSH_GETDP/indheat.geo
>
>
> Info    : Reading 'C:\...\indheat.geo'...
> Info    : Starting subloop 1 in Line Loop 543 (are you sure about this?)
> Error   : 'C:\...\indheat.geo', line 176 : syntax error (()
> Error   : 'C:\...\indheat.geo', line 177 : syntax error (()
> Error   : 'C:\...\indheat.geo', line 186 : syntax error (()
> Error   : 'C:\...\ndheat.geo', line 187 : syntax error (()
>
>
>
> Thank you very much help on this problem.
> Best regards,
> Stefan Braun
>
> SmartCAE, Munich
>
> _______________________________________________
> getdp mailing list
> getdp at geuz.org
> http://www.geuz.org/mailman/listinfo/getdp
>