[Getdp] Problem with induction heat geometry
matti.pellikka at tut.fi
Tue Jan 29 17:03:18 CET 2013
I was able to reproduce the issue with the latest nightly build on 64
bit Windows 7. I'm investigating the issue, but as a temporary fix,
running the mesher from Windows Command Prompt seems to work.
Open the Windows Command Prompt and go to the directory where both
gmsh.exe and indheat.geo are. Run the command:
gmsh indheat.geo -3
This creates the mesh file indheat.msh, which you can examine normally
using the graphical interface of Gmsh. To solve the induction heating
problem, have getdp.exe, indheat.pro and indheat.msh in the same
directory and in that directory run in the Command Prompt the command
getdp indheat.pro -solve MagDynTOComplex -pos MagDynTO
You can examine the resulting .pos files using the graphical interface of Gmsh.
Matti Pellikka, Researcher
Tampere University of Technology, Electromagnetics
On 29 January 2013 13:12, <stefan.braun at smartcae.de> wrote:
> Hello Matti,
> thank you very much for your help.
> I tried the new build 2.6.2 gmesh and the bulid of getdp 2.2.2 and i come
> little bit further.
> I have no error messages and the mesher starts.
> When the mesher reaches reducing cell complex the mesher crashes.
> Do you have any idea how to solve this problem,
> Thank you very much,
> Best regards,
> Stefan Braun
> SmartCAE, Munich
> On Monday, January 28, 2013 10:02:52 AM UTC+1, Matti Pellikka wrote:
>> Hi Stefan,
>> The cohomology computation commands on those lines didn't make it to
>> the current release version 2.6.1 of Gmsh. However, those commands
>> should be available in tomorrow's nightly builds of the development
>> Alternatively, you can compile the current development version by
>> yourself, check that the build option ENABLE_KBIPACK is ON to enable
>> the cohomology computation.
>> I suspect that you also need the latest development version of GetDP
>> to compute the example.
>> Matti Pellikka, Researcher
>> Tampere University of Technology, Electromagnetics
>> On 27 January 2013 00:57, <stefan... at smartcae.de> wrote:
>> > Hello Group Members,
>> > i want to try out a example of onelab.info about induction heating.
>> > If i import the *.geo file in gmsh i get the following error messages.
>> > http://onelab.info/files/getdp/Magnetodynamics/GMSH_GETDP/indheat.geo
>> > Info : Reading 'C:\...\indheat.geo'...
>> > Info : Starting subloop 1 in Line Loop 543 (are you sure about this?)
>> > Error : 'C:\...\indheat.geo', line 176 : syntax error (()
>> > Error : 'C:\...\indheat.geo', line 177 : syntax error (()
>> > Error : 'C:\...\indheat.geo', line 186 : syntax error (()
>> > Error : 'C:\...\ndheat.geo', line 187 : syntax error (()
>> > Thank you very much help on this problem.
>> > Best regards,
>> > Stefan Braun
>> > SmartCAE, Munich
>> > _______________________________________________
>> > getdp mailing list
>> > ge... at geuz.org
>> > http://www.geuz.org/mailman/listinfo/getdp
>> getdp mailing list
>> ge... at geuz.org
More information about the getdp