[Getdp] unable to cross the air-gap

François Henrotte francois.henrotte at uclouvain.be
Tue Oct 8 14:29:30 CEST 2013


Le 8 oct. 2013 à 14:11, Joseph Frippiat a écrit :

> Hello,
>  
> in the simple 2D magnetostatic model attached to this e-mail, the magnetic induction “refuses” to cross the air-gap.


It seem normal to me,
due to the magnetic short circuiting of the permanent magnet.
Try with murCore = 1 (instead of 200) and the field lines
will gently cross the air gap.

Regards,

François


> Could someone tell me why it is so and explain me what I need to change.
>  
> (to solve the model I use this command : ‘getdp machine2 -solve MagSta_a -pos a’)
>  
> Thanks in advance for any answer.
>  
> Joseph
>  
> --
> Joseph Frippiat
> Senior Developer - UPS Division
> 
> KST S.A. - Site of Battice
> Cour Lemaire, 16
> B-4651 BATTICE
> BELGIUM
> Tel : +.32.4.247.01.67
> Fax : +.32.87.31.42.21
> E-mail : frippiat.j at kst.be
> Web : www.kst-ups.com
> 
> Head office : Cour Lemaire, 16 - 4651 Battice (Belgium)
> RPM Liège (Belgium) : 0423.472.603
>  
> <machine2.geo><machine2_data.geo><Magnetostatics.pro><machine2.pro>_______________________________________________
> getdp mailing list
> getdp at geuz.org
> http://www.geuz.org/mailman/listinfo/getdp

--
François Henrotte Dr Ir
UCL - Bâtiment Euler - Av. G. Lemaître 4-6 
B-1348 Louvain-la-Neuve
Tél: +32(0)10 47 23 64  Fax: id. 23 50

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.geuz.org/pipermail/getdp/attachments/20131008/14af1cf5/attachment.html>


More information about the getdp mailing list