[Getdp] why adding a conductive plate in the airgap is a problem ?

Joseph Frippiat joseph_frippiat at voo.be
Mon Dec 28 19:52:40 CET 2015


Hello Jasper,

you are right, I'd forgotten that.

Thank you very much,

Joseph

Le 28/12/2015 17:23, Jasper a écrit :
> Hello Joseph,
>
> I have not tested it but I think you need to add the plate to the 
> voltage constraint:
>
>   { Name Voltage_2D;
>     Case {
>       { Region Core; Value 0.; }
>       { Region Plate; Value 0.; }
>     }
>   }
>
> Hope this helps! Let me know if it works.
>
> Best regards,
>
> Jasper
>
> On Sun, Dec 27, 2015 at 4:18 PM, Joseph Frippiat 
> <joseph_frippiat at voo.be <mailto:joseph_frippiat at voo.be>> wrote:
>
>     The attached 2D model 'eddy4' is solved without problem.
>
>     Then I've decided to add a conductive plate in the airgap and
>     that's the model 'eddy5' (also attached to this mail).
>
>     I can't solve the new model, I get lots of error like this:
>     Error   : '... : Unknown variable 'nan'.
>
>     What is(are) my mistake(s) ?
>     Do I need to change something ?
>     Why ?
>
>     Joseph
>
>     _______________________________________________
>     getdp mailing list
>     getdp at geuz.org <mailto:getdp at geuz.org>
>     http://www.geuz.org/mailman/listinfo/getdp
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.geuz.org/pipermail/getdp/attachments/20151228/d7628de2/attachment.html>