[Getdp] Gmsh error

[RAGHURAM T.R.]

Dear David,

Thanks for the help.

Btw, I got the example from:
https://gitlab.onelab.info/doc/tutorials/blob/master/Electrostatics/microstrip.geo

Regards,
Raghu

On Tue, Mar 20, 2018 at 12:11 PM, David Colignon <David.Colignon at uliege.be>
wrote:

> Hi,
>
> I don't know where your example comes from, but replacing "Curve" by
> "Line" should do the trick.
>
> See http://getdp.info/doc/texinfo/getdp.html#Gmsh-examples
>
> Regards,
>
> Dave
>
> --
> David Colignon, Ph.D.
> 1er Logisticien de Recherche
> Université de Liège
> ACE - Applied & Computational Electromagnetics
> Quartier POLYTECH 1 - Montefiore B28
> Allée de la découverte 10
> 4000 Liège - BELGIQUE
> Tél: +32 (0)4 366 37 32
> http://www.ulg.ac.be/nic4
>
>
> On 20/03/2018 06:59, RAGHURAM T.R. wrote:
>
>> Dear all,
>>
>> I am trying to run the microstrip example and I face the following error
>> in gmsh.
>>
>> Error   : '~/microstrip.geo', line 47 : Unknown variable 'Loop(.)'
>> Error   : '~/microstrip.geo', line 47 : syntax error (=)
>>
>> The error line corresponds to the follwoing:
>>
>> Curve Loop(12) = {1, 2, -8, -9, 7}; Plane Surface(13) = {12};
>> Curve Loop(14) = {10,-11,8,3,4,5};  Plane Surface(15) = {14};
>>
>> Am attaching the .geo file for reference. Please help.
>>
>> Regards,
>> Raghu
>>
>>
>> _______________________________________________
>> getdp mailing list
>> getdp at onelab.info
>> http://onelab.info/mailman/listinfo/getdp
>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://onelab.info/pipermail/getdp/attachments/20180320/3941464c/attachment.html>