[Gmsh] Epaisseur de paroi et maillage (message in english and french)

Gaétan GREGOIRE g.gregoire.atlantis at groupeatlantis.com
Wed Nov 23 14:56:03 CET 2005


Bonjour à tous.

 

Lorsque j'utilise ce fichier, le maillage ne marche pas en dessous d'une certaine épaisseur de paroi :

 

*       Si e=0.02 et e2=0.015, le maillage marche très bien

*       Si e=0.002 et e2=0.0015, GMSH plante et se ferme.

 

Quelqu'un peut-il m'expliquer ?

 

Merci d'avance. Cordialement,

 

Hi all.

 

When I use this geometry, I'm unable to mesh the volume with some parameter values:

 

*       With e=0.02 and e2=0.015, everything is ok

*       With e=0.002 and e2=0.0015, GMSH crash and close itself.

 

Can anybody explain that to me?

 

Thank you by advance. Best regards,

 

 

//////////////////////////////////////////////////////////////

// Maillage du panneau + jb force - GMSH version 1.2

//////////////////////////////////////////////////////////////

 

// Variables

//////////////////////////////////////////////////////////////

 

// Espace avant commencer

Rint= 0;

 

// Hauteur du panneau

H= 1.06;

 

// Largeur du panneau béton

L= 1;

 

// Epaisseur du panneau béton

e= 0.002;

 

// Débord

D= 0.078;

 

// hauteur fixation - jambe de force

Lf1= 0.760;

 

//Largeur de fixation - jambe de force

Lf2= 0.450;

 

// diamètre JdF

D2= 0.05;

 

// Epaisseur JdF

e2= 0.0015;

 

// Distance fond du panneau/fixation JdF

H2=0.03;

 

// Points

//////////////////////////////////////////////////////////////

 

Point(1) = {Rint,0,-L/2,1};

Point(2) = {Rint,0,L/2,1};

Point(3) = {Rint,H-e,L/2,1};

Point(4) = {Rint,H-e,-L/2,1};

Point(5) = {Rint+e,e,-L/2,1};

Point(6) = {Rint+e,e,L/2,1};

Point(7) = {Rint+e,H-e,L/2,1};

Point(8) = {Rint+e,H-e,-L/2,1};

Point(9) = {Rint+e,e,-e,1};

Point(10) = {Rint+e,e,e,1};

Point(11) = {Rint+e,H-e,e,1};

Point(12) = {Rint+e,H-e,-e,1};

Point(13) = {Rint+D,e,-e,1};

Point(14) = {Rint+D,e,e,1};

Point(15) = {Rint+D,H-e,e,1};

Point(16) = {Rint+D,H-e,-e,1};

Point(17) = {Rint+D,H-e,-L/2,1};

Point(18) = {Rint+D,H-e,L/2,1};

Point(19) = {Rint+D,H,-L/2,1};

Point(20) = {Rint+D,H,L/2,1};

Point(21) = {Rint,H,-L/2,1};

Point(22) = {Rint,H,L/2,1};

Point(23) = {Rint+D,0,-L/2,1};

Point(24) = {Rint+D,0,L/2,1};

Point(25) = {Rint+D,e,-L/2,1};

Point(26) = {Rint+D,e,L/2,1};

Point(27) = {Rint+H2+Lf2-D2/2,0,e,1};

Point(28) = {Rint+H2+Lf2-D2/2,0,e+e2,1};

Point(29) = {Rint+H2+Lf2+D2/2,0,e,1};

Point(30) = {Rint+H2+Lf2+D2/2-e2,0,e+e2,1};

Point(31) = {Rint+H2,Lf1-D2/2,e,1};

Point(32) = {Rint+H2,Lf1-D2/2,e+e2,1};

Point(33) = {Rint+H2,Lf1+D2/2,e,1};

Point(34) = {Rint+H2,Lf1+D2/2-e2,e+e2,1};

Point(35) = {D,Lf1+D2/2-Lf1*(D-H2)/Lf2,e,1};

Point(36) = {D,Lf1-D2/2-Lf1*(D-H2)/Lf2,e,1};

Point(37) = {Rint+H2,Lf1+D2/2-e2,e+D2,1};

Point(38) = {Rint+H2,Lf1+D2/2,e+D2,1};

Point(39) = {Rint+H2+Lf2+D2/2,0,e+D2,1};

Point(40) = {Rint+H2+Lf2+D2/2-e2,0,e+D2,1};

// Lignes

//////////////////////////////////////////////////////////////

 

Line(1) = {1,23};

Line(2) = {5,9};

Line(3) = {24,2};

Line(4) = {2,1};

Line(5) = {1,21};

Line(6) = {21,22};

Line(7) = {22,20};

Line(8) = {20,18};

Line(9) = {18,7};

Line(10) = {7,6};

Line(11) = {19,17};

Line(12) = {17,8};

Line(13) = {8,5};

Line(14) = {6,10};

Line(15) = {10,14};

Line(17) = {13,9};

Line(18) = {13,16};

Line(19) = {16,12};

Line(20) = {12,9};

Line(21) = {14,36};

Line(22) = {15,11};

Line(23) = {2,22};

Line(24) = {10,11};

Line(25) = {21,19};

Line(26) = {8,12};

Line(27) = {7,11};

Line(28) = {17,16};

Line(29) = {19,20};

Line(30) = {23,24};

Line(31) = {23,25};

Line(32) = {25,13};

Line(33) = {24,26};

Line(34) = {6,26};

Line(35) = {5,25};

Line(37) = {15,18};

Line(39) = {14,26};

Line(40) = {27,29};

Line(42) = {30,28};

Line(43) = {28,27};

Line(44) = {33,31};

Line(46) = {32,34};

Line(48) = {29,35};

Line(49) = {27,36};

Line(50) = {30,34};

Line(51) = {28,32};

Line(52) = {33,35};

Line(53) = {31,36};

Line(54) = {36,35};

Line(55) = {35,15};

Line(56) = {31,32};

Line(57) = {34,37};

Line(58) = {37,38};

Line(59) = {38,33};

Line(60) = {29,39};

Line(61) = {39,40};

Line(62) = {40,30};

Line(64) = {38,39};

Line(65) = {37,40};

 

// Surfaces

//////////////////////////////////////////////////////////////

 

Line Loop(66) = {37,9,27,-22};

Plane Surface(67) = {66};

Line Loop(68) = {7,8,9,10,34,-33,3,23};

Plane Surface(69) = {68};

Line Loop(70) = {4,5,6,-23};

Plane Surface(71) = {70};

Line Loop(72) = {10,14,24,-27};

Plane Surface(73) = {72};

Line Loop(74) = {6,7,-29,-25};

Plane Surface(75) = {74};

Line Loop(76) = {26,-19,-28,12};

Plane Surface(77) = {76};

Line Loop(78) = {25,11,12,13,35,-31,-1,5};

Plane Surface(79) = {78};

Line Loop(80) = {2,-17,-32,-35};

Plane Surface(81) = {80};

Line Loop(82) = {15,39,-34,14};

Plane Surface(83) = {82};

Line Loop(84) = {18,19,20,-17};

Plane Surface(85) = {84};

Line Loop(86) = {8,-37,-55,-54,-21,39,-33,-30,31,32,18,-28,-11,29};

Plane Surface(87) = {86};

Line Loop(88) = {2,-20,-26,13};

Plane Surface(89) = {88};

Line Loop(90) = {22,-24,15,21,-53,-44,52,55};

Plane Surface(91) = {90};

Line Loop(92) = {4,1,30,3};

Plane Surface(93) = {92};

Line Loop(94) = {59,44,56,46,57,58};

Plane Surface(95) = {94};

Line Loop(96) = {42,43,40,60,61,62};

Plane Surface(97) = {96};

Line Loop(98) = {48,-54,-49,40};

Plane Surface(99) = {98};

Line Loop(100) = {52,-48,60,-64,59};

Plane Surface(101) = {100};

Line Loop(102) = {61,-65,58,64};

Plane Surface(103) = {102};

Line Loop(104) = {57,65,62,50};

Plane Surface(105) = {104};

Line Loop(106) = {42,51,46,-50};

Plane Surface(107) = {106};

Line Loop(108) = {56,-51,43,49,-53};

Plane Surface(109) = {108};

 

// Volume

//////////////////////////////////////////////////////////////

 

Surface Loop(110) = {93,-71,79,75,-69,87,67,73,-83,91,-109,95,-101,-99,97,-107,-105,-103,81,-89,-85,-77};

Volume(111) = {110};

 

// Svg des entités

//////////////////////////////////////////////////////////////

 

Physical Surface(1000) = {67};

Physical Surface(1001) = {69};

Physical Surface(1002) = {71};

Physical Surface(1003) = {73};

Physical Surface(1004) = {75};

Physical Surface(1005) = {77};

Physical Surface(1006) = {79};

Physical Surface(1007) = {81};

Physical Surface(1008) = {83};

Physical Surface(1009) = {85};

Physical Surface(1010) = {87};

Physical Surface(1011) = {89};

Physical Surface(1012) = {91};

Physical Surface(1013) = {93};

Physical Surface(1014) = {95};

Physical Surface(1015) = {97};

Physical Surface(1016) = {99};

Physical Surface(1017) = {101};

Physical Surface(1018) = {103};

Physical Surface(1019) = {105};

Physical Surface(1020) = {107};

Physical Surface(1021) = {109};

Physical Volume(2000) = {111};

 

// Génération du maillage

//////////////////////////////////////////////////////////////

Mesh.CharacteristicLengthFactor= 0.02;

 

 

 

Gaétan GREGOIRE

Responsable Recherche & Développement

-------------------------------------------------------------------------------------------

Groupe ATLANTIS

Parc d'activité du Baconnet

69700 Montagny - France

Tél/fax: +33 (0) 4 72 49 17 42

Mél: g.gregoire.atlantis at groupeatlantis.com

-------------------------------------------------------------------------------------------

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20051123/1e69203c/attachment.html>