[Gmsh] Examples and STL surfaces.

Christophe Geuzaine cag32 at case.edu
Mon Jan 23 15:26:27 CET 2006


billy at dem.uminho.pt wrote:
> Hello Christophe,
> 
> I just added some of my own examples to http://geuz.org/gmsh/wiki/FrontPage.
> 

Great!

> "New versions of Gmsh will also allow you to read surface mesh files
> directly in STL format or in INRIA's mesh format, and use them as a
> starting point for new surfaces and volume meshes."
> 
> I haven't explored the STL capability of Gmsh yet. But, I use Gmsh surface mesh
> to apply boundary conditions in the flow solver. Will Gmsh be able to recognize
> different surfaces of the STL data using for example the angle between facets?  
> 

Yes. Here is an example (just load the file and Gmsh will detect the 
edges; then go to the STL entry in the mesh menu to remesh. Note that 
all this will probably change in future releases...)


> 
> Billy.
> _______________________________________________
> gmsh mailing list
> gmsh at geuz.org
> http://www.geuz.org/mailman/listinfo/gmsh
> 


-- 
Christophe Geuzaine
Assistant Professor, Case Western Reserve University, Mathematics
http://www.case.edu/artsci/math/geuzaine
-------------- next part --------------
A non-text attachment was scrubbed...
Name: TwoObjects.stl.gz
Type: application/x-gzip
Size: 44990 bytes
Desc: not available
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20060123/7aa1ea7a/attachment.gz>