[Gmsh] Problem using GMSH

David Colignon David.Colignon at ulg.ac.be
Thu Sep 28 09:17:13 CEST 2006


Hi,

if I mesh your file on the command line ( gmsh turbine.geo -3 ) it works very well and I get the attached result which looks OK.

But if use the GUI I also have some problems...

Cheers,

Dave

-- 
David Colignon, Ph.D.
ELAP - Service d'Electricité Appliquée
Institut Montefiore B28
Université de Liège
4000 Liège - BELGIQUE
Tél: +32 (0)4 366 37 32
Fax: +32 (0)4 366 29 10
http://elap.montefiore.ulg.ac.be


Livio RIZZO wrote:
> Hello,
> 
> I'm working in France for EDF R&D Clamart, and I'm trying to mesh the 
> geometry I attached to this mail.
> The error that GMSH reported me seems to be due to the presence of 
> coplanar points.
> 
> I tried to modify the geometry, and the definition of the surfaces of my 
> model, but it is impossible for me to have my meshing.
> Can you please have a look and see if I made a mistake ??
> 
> Thank you in advance.
> 
> Livio RIZZO.
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> gmsh mailing list
> gmsh at geuz.org
> http://www.geuz.org/mailman/listinfo/gmsh

-------------- next part --------------
A non-text attachment was scrubbed...
Name: turbine.zip
Type: application/x-zip-compressed
Size: 80818 bytes
Desc: not available
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20060928/f86b1911/attachment.zip>