[Gmsh] Compiling gmsh with OCC

Colignon David David.Colignon at ulg.ac.be
Tue Jun 19 12:28:25 CEST 2007


> Hello
>
> This is my first post, so thanks for the opportunity. I am using Windows
> XP Home.
>
> I have unsuccessfully tried to compile gmsh 2.0.7 with OCC support with
> MinGW/MSys. I used --with-gsl-prefix=c:/msys/1.0/local
> –with-fltk-prefix=c:/msys/1.0/local –enable-occ
> –with-occ-prefix=c:/Program\ Files/OpenCascade/ros/win32 ….On the othr
> hand, compiling with just gsl and fltk prefixes was successful. I have
> attached the output of ./configure as well as the conf.log for the former.
> If relevant, gmsh, gsl and fltk were installed in c:/msys/1.0/home/oem/
> Hope this is sufficient information.

Hi,

I think configure doesn't like the space between Program and Files, the
directory where you installed OCC

from config.log :

...
configure:5070: gcc -o conftest.exe -g -O2  -Lc:/Program
Files/OpenCascade/ros/win32/lib -
Lc:/msys/1.0/local -Lc:/msys/1.0/local/lib  conftest.c -lgslcblas -lm  >&5
gcc.exe: Files/OpenCascade/ros/win32/lib: No such file or directory
...

can you try to move or reinstall OCC elsewhere ?

Cheers,

Dave


-- 
David Colignon, Ph.D.
ELAP - Unité d'Electricité Appliquée
Institut Montefiore B28
Université de Liège
4000 LIEGE - BELGIQUE
Tél: +32 (0)4 366 37 32
Fax: +32 (0)4 366 29 10
http://elap.montefiore.ulg.ac.be
>
> Finally, the point to this is that I am trying to make an application that
> meshes imported STEP and IGES geometries for BEM analysis. I intend on
> using the gmsh 2.0.7 mesh module to do this and am trying to extract the
> relevant parts from the source. The import stage is based on the OCC
> import/export example ’IE’ (VS solution - c# GUI, VC++ inner workings).
> From one of the solution's VC++ projects I am trying to link to the gmsh
> library. This I have built (without OCC support) using MinGW/MSys. The
> library consists of a bunch of .a files (e.g. libGMeshGeo.a) which I think
> are UNIX static library files and not .lib files as I was expecting.
>
> QUESTION:
>
> Can I link to these files from the application previously described? Are
> they compatible for my purposes?
>
> Thanks for any help available. I am new to this kind of programming so
> please forgive any glaring omissions.
>
> Gustav Wolfgramm
>
> p.s Go Emrates Team New Zealand in the America's Cup finals!!
> _______________________________________________
> gmsh mailing list
> gmsh at geuz.org
> http://www.geuz.org/mailman/listinfo/gmsh
>