[Gmsh] creating layers when imported geometry.

Kubicek Bernhard Bernhard.Kubicek at arsenal.ac.at
Sat Jun 23 10:00:05 CEST 2007


Please,
have you tried reading the manual at
http://geuz.org/gmsh/doc/texinfo/gmsh.html ?
In the tutorials, there are examples..
At http://geuz.org/gmsh/wiki/FrontPage there are some further, self-sustained geo files.
Your questions are not very concrete, I have to state. The reason that there is a manual probably is that the developers don't want to explain things over and over again.

Still, I wish you good results with Gmsh,
very nice greetings,
 Bernhard, nearly at aachen




-----Original Message-----
From: gmsh-bounces at geuz.org on behalf of bhargav.patel at power.alstom.com
Sent: Sat 6/23/2007 6:06 AM
To: gmsh at geuz.org
Subject: [Gmsh] creating layers when imported geometry.
 
hi all,
i have imported a geometry in STEP format. Now i want to mesh it by 
creating layers. Can any one help me on this.


Bhargav Patel



With Alstom, preserve the environment. Is printing this email really 
necessary ?
:._______________

CONFIDENTIALITY : This  e-mail  and  any attachments are confidential and 
may be privileged. If  you are not a named recipient, please notify the 
sender immediately and do not disclose the contents to another person, use 
it for any purpose or store or copy the information in any medium.

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20070623/90c45c7c/attachment.html>