[Gmsh] post process problem 2

Umut Tabak u.tabak at tudelft.nl
Fri Jan 9 15:28:01 CET 2009


Umut Tabak wrote:
> Dear all
>
> Regarding the post that I made yesterday
>
>  http://geuz.org/pipermail/gmsh/2009/003943.html
>
> I still have a problem displaying the deflection of the sample plate 
> shown in my previous post. But I realized that I missed to provide some 
> important info. What I wanted to show there, are the displacement 
> amplitudes of the plate in the out of plate direction, I mean in the Z 
> direction. I can get the max and min values of the displacements 
> correctly and their locations also seem to be correct, however they are 
> not displayed in 3D, Z direction. I tried to find an answer to my 
> problem but still it is displayed as a scalar view(apparenlty my input 
> file in the previous post includes scalar node displacements in Z 
> direction). I hope I made it more clear this time for the interested.
> TIA,
> Umut
>
>
> _______________________________________________
> gmsh mailing list
> gmsh at geuz.org
> http://www.geuz.org/mailman/listinfo/gmsh
>
>   
Solved the problem, the answer was the raise options on the offset tab. 
Again thanks for the nice software and commercially looking results ;)

-- 
--
U.T.
--
There are some things which cannot
be learned quickly, and time, which is all we have,
must be paid heavily for their acquiring.
They are the very simplest things,
and because it takes a man's life to know them
the little new that each man gets from life
is very costly and the only heritage he has to leave.
- Ernest Hemingway