[Gmsh] gmsh-announce Digest, Vol 37, Issue 1

Christophe Geuzaine cgeuzaine at ulg.ac.be
Mon Jan 26 18:56:04 CET 2009


Zenker, Dr. Matthias wrote:
> Hi,
> 
> reading section 3 of the paper mentioned below, I have the impression
> that gmsh can directly read CAD models (e.g from SolidWorks or CATIA).
> Is this possible, or did I misunderstand?

Hi Matthias - It is possible, but the only CAD kernel for which we can 
legally distribute the interface is OpenCascade. When you link with 
OpenCascade you can then load native OpenCascade files (".brep").

The license for e.g. SolidWorks prevents us from distributing the 
interface...


> The documentation speaks only about STEP, IGES and such.
> 
> Matthias
> 
>> -----Original Message-----
>> From: gmsh-announce-bounces at geuz.org 
>> [mailto:gmsh-announce-bounces at geuz.org] On Behalf Of 
>> gmsh-announce-request at geuz.org
>> Sent: Saturday, January 24, 2009 12:00 PM
>> To: gmsh-announce at geuz.org
>> Subject: gmsh-announce Digest, Vol 37, Issue 1
>>
>> Send gmsh-announce mailing list submissions to
>> 	gmsh-announce at geuz.org
>>
>> To subscribe or unsubscribe via the World Wide Web, visit
>> 	http://www.geuz.org/mailman/listinfo/gmsh-announce
>> or, via email, send a message with subject or body 'help' to
>> 	gmsh-announce-request at geuz.org
>>
>> You can reach the person managing the list at
>> 	gmsh-announce-owner at geuz.org
>>
>> When replying, please edit your Subject line so it is more 
>> specific than "Re: Contents of gmsh-announce digest..."
>>
>>
>> Today's Topics:
>>
>>    1. New Gmsh release: 2.3.0 (Christophe Geuzaine)
>>
>>
>> ----------------------------------------------------------------------
>>
>> Message: 1
>> Date: Fri, 23 Jan 2009 14:19:06 +0100
>> From: Christophe Geuzaine <cgeuzaine at ulg.ac.be>
>> Subject: [Gmsh-announce] New Gmsh release: 2.3.0
>> To: gmsh-announce at geuz.org
>> Message-ID: <4979C3CA.8030609 at ulg.ac.be>
>> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>>
>>
>> New in 2.3.0: major graphics and GUI code refactoring; new 
>> full-quad/hexa subdivision algorithm (removed 
>> Mesh.RecombineAlgo); improved automatic transfinite corner 
>> selection (now also for volumes); improved visibility 
>> browser; new automatic adaptive visualization for high-order 
>> simplices; modified arrow size, clipping planes and transform 
>> options; many improvements and bug fixes all over the place.
>>
>> Downloads, mailing lists, etc.: http://geuz.org/gmsh/
>>
>>
>> PS: The "Gmsh paper" has been accepted for publication (the 
>> preprint is available here: 
>> http://geuz.org/gmsh/gmsh_paper_preprint.pdf). For now, you 
>> can cite it as
>>
>> ``C. Geuzaine and J.-F. Remacle. Gmsh: a three-dimensional 
>> finite element mesh generator with built-in pre- and 
>> post-processing facilities. International Journal for 
>> Numerical Methods in Engineering, Accepted for publication, 2009''
>>
>> We will update the reference on the web site with volume and 
>> page information as soon as the article is actually published.
>>
>>
>>
>>
>> ------------------------------
>>
>> _______________________________________________
>> gmsh-announce mailing list
>> gmsh-announce at geuz.org
>> http://www.geuz.org/mailman/listinfo/gmsh-announce
>>
>>
>> End of gmsh-announce Digest, Vol 37, Issue 1
>> ********************************************
>>
> 
> _____________________________________________________________________
> ERBE Elektromedizin GmbH
> Firmensitz: 72072 Tuebingen
> Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede
> Registergericht: Stuttgart HRB 380137
> 
> 
> _______________________________________________
> gmsh mailing list
> gmsh at geuz.org
> http://www.geuz.org/mailman/listinfo/gmsh
> 
> 


-- 
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science
http://www.montefiore.ulg.ac.be/~geuzaine