[Gmsh] Using STL file in gmsh

Praveen C cpraveen at gmail.com
Wed Jul 22 18:48:11 CEST 2009


Sorry, I should make a correction to my email. I am using an IGS file not
stl.praveen

On Wed, Jul 22, 2009 at 10:08 PM, Praveen C <cpraveen at gmail.com> wrote:

> Hello
>
>
> I obtained the definition of a wing geometry in the form of an stl file. I
> now try to define an outer boundary. First I am trying to make a line from a
> new point to a point present in the stl file. But gmsh gives the error
>
> Error   : Unknown control point 15 in Curve 1
>
> But point number 15 exists. Can somebody tell me what I am doing wrong ?
>
> Thanks
> praveen
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20090722/33918f6b/attachment.html>