[Gmsh] Gmsh: problem for ruled surface with BSPline

Regis Duvigneau Regis.Duvigneau at sophia.inria.fr
Wed Sep 15 14:25:35 CEST 2010


Hi,

When a ruled surface is generated with a BSpline as boundary, some  
triangles at other boundaries are strongly stretched, whatever the  
algorithm used, yielding a computational grid of very poor quality.  
(see attached geo file and figure).

Does anyone has a solution to correct this ?


Thanks in advance.

Régis Duvigneau



-----------------------------------------------------------------
Regis Duvigneau
Permanent Research Associate
INRIA Sophia Antipolis - OPALE Project-Team
-----------------------------------------------------------------
2004 route des lucioles, 06902 Sophia-Antipolis
tel: (33)4 92 38 71 77
fax:(33)4 92 38 79 80
-----------------------------------------------------------------
http://www-sop.inria.fr/members/Regis.Duvigneau


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20100915/afae973d/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: test.png
Type: image/png
Size: 60335 bytes
Desc: not available
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20100915/afae973d/attachment.png>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20100915/afae973d/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: test.geo
Type: application/octet-stream
Size: 543 bytes
Desc: not available
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20100915/afae973d/attachment.geo>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20100915/afae973d/attachment-0002.html>