[Gmsh] Meshing of compound volumes

Zenker, Dr. Matthias Dr.Matthias.Zenker at erbe-med.com
Thu Jun 9 12:41:50 CEST 2011


Hi,

you can try Options->Geometry->General->"Cut and merge faces" before meshing. This should work for duplicated planar faces.
A more general solution is being worked on (by me, actually...).

HTH,

Matthias

________________________________
Von: Serban.Georgescu at uk.fujitsu.com [mailto:Serban.Georgescu at uk.fujitsu.com]
Gesendet: Mittwoch, 8. Juni 2011 18:26
An: gmsh at geuz.org
Betreff: [Gmsh] Meshing of compound volumes

Hi all,

I have  quick question regarding the meshing of compound volumes.
I have a simple geometry, basically two cubes stacked together and sharing one face. If I fuse the blocks, then there is only one volume and meshing works correctly. However, if I export as a compound volume, so two volumes sharing one face, Gmsh gives loads of errors. Is there a way to mesh such compounds in Gmsh?

Thanks for your time,
Serban


______________________________________________________________________

 Fujitsu Laboratories of Europe Limited
 Hayes Park Central, Hayes End Road, Hayes, Middlesex, UB4 8FE
 Registered No. 4153469

 This e-mail and any attachments are for the sole use of addressee(s) and
 may contain information which is privileged and confidential. Unauthorised
 use or copying for disclosure is strictly prohibited. The fact that this
 e-mail has been scanned by Trendmicro Interscan does not guarantee that
 it has not been intercepted or amended nor that it is virus-free.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20110609/7aa9eaa0/attachment.html>