[Gmsh] Structured mesh for a tire rib

Ziyu ZHANG buaazhangziyu at gmail.com
Wed Oct 3 23:00:38 CEST 2012


Hi all,

I am trying to mesh a tire rib which is imported from a stp file. The rib
is simply a trapezoidal prism with a dent on each of both side faces. I
attached the geo file so you can see the model via GUI. I know that
transfinite lines ans extruding can be used to get structured mesh. But for
this imported geometrical model, is it possible to have a strutured tet
mesh (or at least a mesh with most elements structures)?

Best,

Ziyu

-- 
Ziyu ZHANG
PhD Student
Duke Computational Mechanics Laboratory
Department of Civil & Environmental Engineering
Duke University
Cell: 919-667-7501
Office: 919-660-5031
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20121003/3432a79a/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: one_lam.geo
Type: application/octet-stream
Size: 4320 bytes
Desc: not available
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20121003/3432a79a/attachment.geo>