[Gmsh] 3D mesh

Zenker, Dr. Matthias Matthias.Zenker at erbe-med.com
Wed Oct 9 08:56:38 CEST 2013


Hi Philippe,

I don't know how to get the number of a surface created by extrusion automatically.
You can either define your physical entities in the GUI (Geometry->Physical Groups->Add), or tell gmsh to "save all" when you save the mesh, as I wrote before.

HTH,

Matthias


> -----Ursprüngliche Nachricht-----
> Von: Philippe Ackerer [mailto:ackerer at unistra.fr]
> Gesendet: Dienstag, 8. Oktober 2013 22:11
> An: Zenker, Dr. Matthias
> Betreff: Re: AW: [Gmsh] 3D mesh
>
> Thanks Matthias, but for saving physical surfaces or volumes I need to define
> plane surfaces and volumes. Any idea of how getting the corresponding
> number ?
> Best regards
> Philipe
>
> -------------------------------------------------------------
> Philippe ACKERER
> LHyGeS UMR 7517 CNRS-UdS Engees
> 1, rue Blessig
> 67000 STRASBOURG
> Tel: +33 (0)388 560 561
>
> Le 08/10/2013 12:34, Zenker, Dr. Matthias a écrit :
> > Hi Philippe,
> >
> > either mark everything you want to save as physical or check "save all
> (ignore physical groups)" when you save your mesh.
> >
> > HTH,
> >
> > Matthias
> >
> >> -----Ursprüngliche Nachricht-----
> >> Von: Philippe Ackerer [mailto:ackerer at unistra.fr]
> >> Gesendet: Montag, 7. Oktober 2013 22:54
> >> An: gmsh at geuz.org
> >> Betreff: [Gmsh] 3D mesh
> >>
> >> Hi
> >> I missunderstood something. I plan to discretize a colmun.
> >> Could you explain me why only plan z=0 (nodes and elements) is stored
> >> in the .msh file ?
> >> I want also to identify the top surfaces, as I have done for the
> >> bottom surfaces (physical surface 101 and 'Dirichlet'). Any tips are
> welcome.
> >> I attached the file.
> >> Thanks and thanks a lot for this very helpfull mesh generator.
> >>
> >> Best regards
> >> Philippe
> >>
> >> --
> >> -------------------------------------------------------------
> >> Philippe ACKERER
> >> LHyGeS UMR 7517 CNRS-UdS Engees
> >> 1, rue Blessig
> >> 67000 STRASBOURG
> >> Tel: +33 (0)388 560 561
> >
> >
> >
> __________________________________________________________
> ___________
> > ERBE Elektromedizin GmbH
> > Firmensitz: 72072 Tuebingen
> > Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede
> > Registergericht: Stuttgart HRB 380137


_____________________________________________________________________
ERBE Elektromedizin GmbH
Firmensitz: 72072 Tuebingen
Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede
Registergericht: Stuttgart HRB 380137