[Gmsh] Gmsh crashed when refine the mesh

Ziyu ZHANG buaazhangziyu at gmail.com
Fri Jan 17 03:29:46 CET 2014


Dear Gmsh team,

I have got the attached GEO file and POS file to get a refined mesh. But
when I type

gmsh It3xxx.geo -3 -bgm It3003.pos -o It3004.msh

Gmsh crashes with errors saying "faces intersect" and "element has two
identical points" ect... I searched previous questions and someone says it
is because some characteristic length is too small. However, I am not sure
this is true in my case. Could you please take a look and give some advice?

Best,

Ziyu

-- 
Ziyu ZHANG 張子瑜
PhD Student
Duke Computational Mechanics Laboratory
Department of Civil & Environmental Engineering
Duke University
Office: 919-660-5031
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20140116/44b55b47/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: It3xxx.geo
Type: application/vnd.dynageo
Size: 4721 bytes
Desc: not available
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20140116/44b55b47/attachment.geo>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: It3003.pos
Type: application/octet-stream
Size: 9172702 bytes
Desc: not available
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20140116/44b55b47/attachment.pos>