[Gmsh] using multiple options in gmsh

[Jean-François Remacle]

Le 6 févr. 2014 à 16:49, Christophe Geuzaine <cgeuzaine at ulg.ac.be> a écrit :

> 
> On 03 Feb 2014, at 11:03, thierry.hocquellet at cea.fr wrote:
> 
>> Hello everybody
>> 
>> I would like if it’s possible to handle with several options in the same geo file.
>> 
>> I join an exemple where I need to have Mesh.Algorihm=2 & Mesh.CharacteristicLengthExtendFromBoundary=0 for the red surface
>> And have Mesh.Algorihm=5 & Mesh.CharacteristicLengthExtendFromBoundary=1 for the other surface
>> 
>> I’m not sure it’s possible to have differents options in the same geo file or mesh the surfaces one after the other.
>> In this case, what the best method to mesh surfaces with differents options ?
>> 
> 
> Unfortunately it's currently not possible; these options are global.
> 
> 

Not all indeed  :

MeshAlgorithm Surface {1,2,3}  6;

allows algorithm 6 (frontal) to be applied to surface 1, 2 and 3

JF

>> Thanks
>> 
>> Best regards
>> 
>> Thierry
>> <several.geo><several2.geo><surface1.png><surface2.png>_______________________________________________
>> gmsh mailing list
>> gmsh at geuz.org
>> http://www.geuz.org/mailman/listinfo/gmsh
> 
> -- 
> Prof. Christophe Geuzaine
> University of Liege, Electrical Engineering and Computer Science 
> http://www.montefiore.ulg.ac.be/~geuzaine
> 
> 
> 
> 
> _______________________________________________
> gmsh mailing list
> gmsh at geuz.org
> http://www.geuz.org/mailman/listinfo/gmsh

------------------------------------------------------------------
Prof. Jean-Francois Remacle
Universite catholique de Louvain (UCL)
Ecole Polytechnique de Louvain (EPL) - Louvain School of Engineering
Institute of Mechanics, Materials and Civil Engineering (iMMC)
Center for Systems Engineering and Applied Mechanics (CESAME)
Tel : +32-10-472352 -- Mobile : +32-473-909930 

 





-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20140207/79ac7970/attachment.html>