[Gmsh] how to test the quality of mesh in gmsh

[Valentin Biasi]

Hi Lianjun,

Once you have your mesh generated, you could check the mesh quality by 
using the tool Tools -> Statistics.
You could plot Gamma, Eta and Rho values.
These values are relative to non-orthogonality and aspect ratio unless I 
am mistaken.
More info on: http://www.geuz.org/pipermail/gmsh/2005/001636.html

Take a look at these values and try to improve your mesh quality.

Best regards,

____________________________________________________________________

  Valentin BIASI
  Doctorant || PhD student
  ONERA
  DMAE - TACT
  2 avenue Edouard Belin - BP 74025
  31055 Toulouse Cedex 4 - FRANCE
  Email : Valentin.Biasi at onera.fr
  Tel : +335 62 25 25 25 (Poste 22 17)
____________________________________________________________________
              Terms of use: http://www.onera.fr/onera-en/emails-terms

Le 20/03/2014 15:49, Lianjun Wu a écrit :
> Dear gmsh user,
> How can I generate mesh with high quality in gmsh and how can I test 
> the quality of mesh in gmsh. Thank you very much.
> Best regards,
> Lianjun
>
>
> _______________________________________________
> gmsh mailing list
> gmsh at geuz.org
> http://www.geuz.org/mailman/listinfo/gmsh

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20140321/86608ca6/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Valentin_Biasi.vcf
Type: text/x-vcard
Size: 255 bytes
Desc: not available
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20140321/86608ca6/attachment.vcf>