[Gmsh] Remeshing a stl file

Esteban Vargas vb.esteban at gmail.com
Tue Oct 14 23:58:43 CEST 2014


Hello.

I'm having a problem remeshing a stl cad file.

The problem consists in a propeller located in the center of a cylinder.
That cylinder represents the water volume in which the propeller rotates.

Te CAD model was generated in SolidEDGE, and was saved as STL file.Then it
was imported to gmsh, then I apply reclassify 2D and the it was saved as
reclassied_mesh with no problem.

The problem is presented when I try to remesh the volume in which the
propeller is located. It has been impossible for me, even when I'm
following the steps in:

http://geuz.org/pipermail/gmsh/2011/006887.html
https://geuz.org/trac/gmsh/wiki/STLRemeshing

You can note also that the hub of the propeller doesn't have triangular
mesh but the propeller stem (blades) has it.

I really appreciate any help, advice, comment from you.

Thanks.

I attach the files.

-- 
Esteban Vargas Bolívar
Metálicas Léguz S.A.
Tel.: (4)5203600 Ext. 103
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20141014/8699e7d7/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: reclassied_mesh.geo
Type: application/octet-stream
Size: 700 bytes
Desc: not available
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20141014/8699e7d7/attachment.geo>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: remesh.geo
Type: application/octet-stream
Size: 612 bytes
Desc: not available
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20141014/8699e7d7/attachment-0001.geo>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: reclassied_mesh.msh
Type: model/mesh
Size: 1981733 bytes
Desc: not available
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20141014/8699e7d7/attachment.msh>