[Gmsh] CFD mesh with prismatic boundary layer based on STL

Johannes Dillinger jojodillinger at gmail.com
Fri Apr 1 19:15:47 CEST 2016

Dear Ruth,
thanks a lot for the modification! There is is just one problem left, the
tetrahedra mesh does not connect to the outer surface of the prism
sublayer, but directly to the wing surface; the meshes intersect (see
picture attached).
I got a similar result with Delauney-3D-meshing.
Do you have a hint on how to solve this?
Thank you so much again!!
Kind regards,

2016-04-01 11:59 GMT+02:00 Ruth Vazquez Sabariego <
ruth.sabariego at esat.kuleuven.be>:

> Hope the attached patched version of your file, does what you want.
> There was a small problem with the surface loops.
> Regards,
> Ruth
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://onelab.info/pipermail/gmsh/attachments/20160401/d69d0777/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: gmsh.jpg
Type: image/jpeg
Size: 272854 bytes
Desc: not available
URL: <http://onelab.info/pipermail/gmsh/attachments/20160401/d69d0777/attachment-0001.jpg>

More information about the gmsh mailing list