[Gmsh] meshing for fluid-structure interaction

Uģis Lācis ugis.lacis at gmail.com
Sat Aug 27 11:06:40 CEST 2016


Hi Deepak,

recently we had similar discussion in this same mailing list. Look up 
this mail and following responses:
http://onelab.info/pipermail/gmsh/2016/010618.html

Based on the following suggestions, I was able to generate conforming 
(same nodes at the interface) meshes for my fluid-structure interaction 
problem.

Best,
Ugis

On 26/08/16 12:33, Deepak Garg wrote:
> Hi there,
>
> I am working on fluid-structure interaction problem. I need two 
> different meshes, one for fluid and another one for structure. Both 
> the meshes must have the same nodes at the interface.
>
> Any suggestions or experiences ?
>
> Thanks.
> Deepak
>
>
> _______________________________________________
> gmsh mailing list
> gmsh at onelab.info
> http://onelab.info/mailman/listinfo/gmsh

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://onelab.info/pipermail/gmsh/attachments/20160827/7068b43e/attachment.html>


More information about the gmsh mailing list