[Gmsh] Extrude from imported geometry
Guillaume.DILASSER at cea.fr
Tue Mar 7 08:10:48 CET 2017
Ok, if you really need to work on the imported mesh, you should probably have a look at this archived topic: http://onelab.info/pipermail/gmsh/2017/011111.html. Two solutions have been there discussed to tackle a problem quite similar to yours.
Doctorant SACM / LEAS
CEA - Centre de Saclay - Bât.123 - PC 319c
91191 Gif sur Yvette Cedex - France -
guillaume.dilasser at cea.fr<mailto:guillaume.dilasser at cea.fr>
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the gmsh