[Gmsh] Cannot delete entities

Christophe Geuzaine cgeuzaine at ulg.ac.be
Fri Jul 28 16:27:57 CEST 2017


> On 28 Jul 2017, at 15:13, Alessandro Vicini <alessandro.vicini at sitael.com> wrote:
> 
> 
> 
> Hullo, can anybody tell my why Gmsh doesn't allow me to delete the points internal to the volume in the attached geo file (for example points #32 or #33)? I am using version 3.0.1.

Good catch: "Recursive Delete" with the built-in CAD kernel did not remove the "reversed" curves (the built-in CAD kernel stores curves with both orientations), which left some points attached to invisible curves... which meant that they could not be removed.

This is now fixed in the master Git branch.

> 
> Another question: if I merge a file from the GUI, the merge command is not appended to the script, so that if I reload the script the merge operation is lost. Is this normal?

Yes: none of the commands from the main menu are appended in the script; only the geometry construction commands from Geometry tree menu are appended to the script.

> 
> Thank you.
> 
> A.
> <HT400_02.geo>_______________________________________________
> gmsh mailing list
> gmsh at onelab.info
> http://onelab.info/mailman/listinfo/gmsh

-- 
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science 
http://www.montefiore.ulg.ac.be/~geuzaine

Free software: http://gmsh.info | http://getdp.info | http://onelab.info




More information about the gmsh mailing list