[Gmsh] bug in mesh generation

[Christophe Geuzaine]

Dear Andrew,

Does the latest snaphot produce the same invalid mesh? If so, can you try without the recombination + with the MeshAdapt 2D algorithm?

Thanks,

Christophe

> On 17 Jun 2018, at 00:20, andrew <armitatz at gmail.com> wrote:
> 
> Hi,
> 
> When I try to create a mesh with the following file I get an error when converting it with gmshToFoam. After some research I found that gmsh produces a problematic cell.
> 
> Can this be avoided?
> 
> I am using gmsh 3.0.6 and this happens both in Linux and windows.
> 
> kind regards
> 
> Andrew
> 
> <Clipboard01.jpg><m.geo>_______________________________________________
> gmsh mailing list
> gmsh at onelab.info
> http://onelab.info/mailman/listinfo/gmsh

— 
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science 
http://www.montefiore.ulg.ac.be/~geuzaine

Free software: http://gmsh.info | http://getdp.info | http://onelab.info

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://onelab.info/pipermail/gmsh/attachments/20180618/91459b3e/attachment.html>