[Gmsh] gmsh-4.0.1 : error during cmake

[Ashwini D R]

>
>    as per the trailing mail,

> CGNS is installed and CMake logs did not give any info about why the CGNS
> is not picked up. CMake error and output logs are attached with this mail.
> Please help in resolving the issue
>

Thanks and Regards,
Ashwini D R

>
>
>
> > On 25 Sep 2018, at 12:18, Ashwini D R <ashwinidr3 at gmail.com> wrote:
> >
> > Hi
> >
> > Thanks for the help  !
> >  gmsh was installed successfully, However i have trouble generating the
> cgns file.
> >
> > cmake -DENABLE_HXT=0 -DENABLE_CGNS=1 ..
> >
>
> Do you have the CGNS library installed on your system? If you do, check
> the cmake log to see why it was not picked up.
>
>
>
> > make
> >
> > make install
> >
> >
> > /gmsh-4.0.1-source/Gmsh401/gmsh spices.geo -1 -format cgns -o
> /Mesh/spices.cgns
> >
> > Error   : This version of Gmsh was compiled without CGNS support
> >
> > Kindly help
> >
> > Thanks and Regards,
> > Ashwini D R
> >
> > On Mon, Sep 24, 2018 at 11:47 PM Christophe Geuzaine <
> cgeuzaine at uliege.be> wrote:
> >
> > HXT is not yet support with Visual C++ : just disable it (cmake
> -DENABLE_HXT=0)
> >
> > > On 24 Sep 2018, at 13:59, Max Orok <morok at mevex.com> wrote:
> > >
> > > Hi Ashwini,
> > >
> > > Is there any more information about your build, like build options,
> system info, etc?
> > >
> > > Sincerely,
> > > Max Orok
> > >
> > > On Mon, Sep 24, 2018 at 7:53 AM Ashwini D R <ashwinidr3 at gmail.com>
> wrote:
> > > Hi,
> > >
> > > I get the following error during the installation of gmsh, Kindly help
> > >
> > >
> > > In file included from
> /opt/software/gmsh-4.0.1-source/contrib/hxt/hxt_linear_system.c:21:
> > >
> > > /opt/software/gmsh-4.0.1-source/contrib/hxt/hxt_linear_system_lu.h:6:
> error: redefinition of typedef ‘HXTLinearSystemLU’
> > >
> > > /opt/software/gmsh-4.0.1-source/contrib/hxt/hxt_linear_system.h:23:
> note: previous declaration of ‘HXTLinearSystemLU’ was here
> > >
> > > make[2]: *** [CMakeFiles/gmsh.dir/contrib/hxt/hxt_linear_system.c.o]
> Error 1
> > >
> > > make[1]: *** [CMakeFiles/gmsh.dir/all] Error 2
> > >
> > > make: *** [all] Error 2
> > >
> > >
> > >
> > >
> > >
> > > Thanks and Regards,
> > >
> > > Ashwini D R
> > >
> > > _______________________________________________
> > > gmsh mailing list
> > > gmsh at onelab.info
> > > http://onelab.info/mailman/listinfo/gmsh
> > >
> > >
> > > --
> > > Max Orok
> > > Contractor
> > > www.mevex.com
> > >
> > >
> > > _______________________________________________
> > > gmsh mailing list
> > > gmsh at onelab.info
> > > http://onelab.info/mailman/listinfo/gmsh
> >
> > —
> > Prof. Christophe Geuzaine
> > University of Liege, Electrical Engineering and Computer Science
> > http://www.montefiore.ulg.ac.be/~geuzaine
> >
> > Free software: http://gmsh.info | http://getdp.info | http://onelab.info
> >
> > _______________________________________________
> > gmsh mailing list
> > gmsh at onelab.info
> > http://onelab.info/mailman/listinfo/gmsh
>
> —
> Prof. Christophe Geuzaine
> University of Liege, Electrical Engineering and Computer Science
> http://www.montefiore.ulg.ac.be/~geuzaine
>
> Free software: http://gmsh.info | http://getdp.info | http://onelab.info
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://onelab.info/pipermail/gmsh/attachments/20180927/3e3777e3/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: CMakeError.log
Type: application/octet-stream
Size: 5280 bytes
Desc: not available
URL: <http://onelab.info/pipermail/gmsh/attachments/20180927/3e3777e3/attachment-0002.log>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: CMakeOutput.log
Type: application/octet-stream
Size: 87472 bytes
Desc: not available
URL: <http://onelab.info/pipermail/gmsh/attachments/20180927/3e3777e3/attachment-0003.log>