[Gmsh] second order prism elements

[Christophe Geuzaine]

> On 16 Oct 2018, at 20:28, Mark Smith <piedycat at yahoo.com> wrote:
> 
> Hi Gmsh team,
> I use Gmsh to produce meshes for use with the Elmer multiphysics package. Unfortunately in Elmer the higher order prism elements which Elmer uses are 15 node quadratic prism elements, 6 corner nodes and 9 mid-side nodes, is there a way to get Gmsh to output type 18 rather than type 13 which seems to be the default when selecting "set order 2"

Mesh.SecondOrderIncomplete = 1;


> Best regards
> Mark
> _______________________________________________
> gmsh mailing list
> gmsh at onelab.info
> http://onelab.info/mailman/listinfo/gmsh

— 
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science 
http://www.montefiore.ulg.ac.be/~geuzaine

Free software: http://gmsh.info | http://getdp.info | http://onelab.info