[Gmsh] Mesh generation with a hole

[Christophe Geuzaine]

> On 6 Dec 2018, at 10:52, Zuheyr Alsalihi <alsalihi at vki.ac.be> wrote:
> 
> Dear Prof. Geuzaine and fellow GMSH users,
> 
> I cannot succeed creating STL model with holes in it.
> If I create different volume entities for the outer body and the holes, can I tell gmsh "ignore certain volumes"
> and do not mesh them!?

If you don't define the volume corresponding to the hole, Gmsh will not mesh it... Can you share a simple example?

> 
> Kindest regards and many thanks,
> 
> Zuheyr Alsalihi

— 
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science 
http://www.montefiore.ulg.ac.be/~geuzaine

Free software: http://gmsh.info | http://getdp.info | http://onelab.info