[Gmsh] Possible Error in Tetrahedral Meshing

Jackman, K, Dr [kjackman@sun.ac.za] kjackman at sun.ac.za
Mon Apr 8 12:47:46 CEST 2019


To Whom It May Concern,

I have noticed some errors in the tetrahedral meshes, generated by Gmsh (both v3.0.6 and v4.2.2). Under certain circumstances, e.g. volumes with holes, some tetrahedron elements do not align with adjacent tetrahedrons. An example is attached that demonstrates this error, including images that show the location of the edges that do not connect.

I have tried several geometric examples, including meshing algorithms (surface and volume), but this does not fix the problem. The attached example seems to work when selecting “Mesh.Algorithm = 2;”, but this is not always the case for other geometries.

Hopefully, this is just a simple mistake in my geometry file.

Best regards,
Kyle
[http://cdn.sun.ac.za/100/ProductionFooter.jpg]<http://www.sun.ac.za/english/about-us/strategic-documents>

The integrity and confidentiality of this email are governed by these terms. Disclaimer<http://www.sun.ac.za/emaildisclaimer>
Die integriteit en vertroulikheid van hierdie e-pos word deur die volgende bepalings bereël. Vrywaringsklousule<http://www.sun.ac.za/emaildisclaimer>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://onelab.info/pipermail/gmsh/attachments/20190408/e596518b/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Gmsh_error_overview.zip
Type: application/x-zip-compressed
Size: 1029900 bytes
Desc: Gmsh_error_overview.zip
URL: <http://onelab.info/pipermail/gmsh/attachments/20190408/e596518b/attachment-0001.zip>


More information about the gmsh mailing list