[Gmsh] Problem with geometry modeling

Alessandro Vicini alessandro.vicini at sitael.com
Fri Jul 5 15:17:42 CEST 2019


Sorry if in these days I'm spamming a bit... :)

I attach a geo file (Test_04, together with spline.geo which is merged into it). I need to generate the plane surface which is shown in the attached picture, but gmsh doesn't accept the inner circle as a hole.... Any suggestions...? Thank you.

Alessandro

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://onelab.info/pipermail/gmsh/attachments/20190705/9f873c2d/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Test_04.geo
Type: application/octet-stream
Size: 4139 bytes
Desc: Test_04.geo
URL: <http://onelab.info/pipermail/gmsh/attachments/20190705/9f873c2d/attachment-0002.geo>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: spline.geo
Type: application/octet-stream
Size: 4308 bytes
Desc: spline.geo
URL: <http://onelab.info/pipermail/gmsh/attachments/20190705/9f873c2d/attachment-0003.geo>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: surface.jpg
Type: image/jpeg
Size: 100470 bytes
Desc: surface.jpg
URL: <http://onelab.info/pipermail/gmsh/attachments/20190705/9f873c2d/attachment-0001.jpg>


More information about the gmsh mailing list