[Gmsh] R: ellipsoid issue

[Peter Johnston]

Thanks guys,

Yes it worked for me last week under 4.3.0. Today I downloaded 4.4.1 and it no longer works. I am using the Mac version.

Regards,

Peter.

Peter Johnston, Griffith University.
________________________________
From: Jeremy Theler <jeremy at seamplex.com>
Sent: Thursday, September 5, 2019 8:02:01 PM
To: Alessandro Vicini <alessandro.vicini at sitael.com>; Peter Johnston <p.johnston at griffith.edu.au>; gmsh at geuz.org <gmsh at geuz.org>
Subject: Re: [Gmsh] R: ellipsoid issue

Indeed, see attached png.
I am using latest Git linked against OCE 7.3.0 in GNU/Linux.

On Thu, 2019-09-05 at 08:13 +0000, Alessandro Vicini wrote:
Hello Peter,

I’m using 4.4.0 (under windows), and your script seems to work for me…

A.

Da: gmsh <gmsh-bounces at ace20.montefiore.ulg.ac.be> Per conto di Peter Johnston
Inviato: giovedì 5 settembre 2019 09:58
A: gmsh at geuz.org
Oggetto: [Gmsh] ellipsoid issue

Hello,

I am trying to create some ellipsoids in 3D and came across this solution:


SetFactory("OpenCASCADE");

Sphere(1) = {0, 0, 0, 0.5};

Dilate {{0, 0, 0}, {1.5, 1, 0.5}} { Volume{1}; }

Characteristic Length{:} = 0.1;

Mesh.Algorithm = 6;

This was posted on the webpage

<https://urlsand.esvalabs.com/?u=http%3A%2F%2Fonelab.info%2Fpipermail%2Fgmsh%2F2018%2F011986.html&e=9895bfa0&h=ea70f4cd&f=y&p=y>

http://onelab.info/pipermail/gmsh/2018/011986.html

,however, the example appears to be generating one-point curves and so the meshing is failing.

I am using gmsh 4.4.1. I would be grateful for any suggestions and/or advice. I used a similar script before and not had this issue.

Thanks very much,

Peter.

---------------------------------------------------------------------

Associate Professor Peter Johnston (FAustMS, FIMA)
School of Environment and Science
Griffith University | Nathan | QLD 4111 | Technology (N44) Room 3.19
T +61 7 373 57748| F +61 7 373 57656 Email p.johnston at griffith.edu.au<mailto:p.johnston at griffith.edu.au>

_______________________________________________

gmsh mailing list

<mailto:gmsh at onelab.info>

gmsh at onelab.info


<http://onelab.info/mailman/listinfo/gmsh>

http://onelab.info/mailman/listinfo/gmsh

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://onelab.info/pipermail/gmsh/attachments/20190905/9c04a9b3/attachment-0001.html>