[Gmsh] Creating 3D geometry

Deepa deepamahm.iisc at gmail.com
Sat Jan 4 15:56:38 CET 2020


Hello Everyone,

I want to generate a 3D geometry of the below image.

[image: ske1.png]

I could generate a centerline image using image processing tools in
Mathematica.
[image: centerline1.png]

However, I'm not sure how to make use of this centerline image to create a
3D geometry.
Any suggestions on how to create the 3D geometry from the above images in
gmsh will be really helpful.

Thanks a lot,
Deepa
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://onelab.info/pipermail/gmsh/attachments/20200104/27f425b9/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ske1.png
Type: image/png
Size: 1652 bytes
Desc: not available
URL: <http://onelab.info/pipermail/gmsh/attachments/20200104/27f425b9/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: centerline1.png
Type: image/png
Size: 1274 bytes
Desc: not available
URL: <http://onelab.info/pipermail/gmsh/attachments/20200104/27f425b9/attachment-0001.png>


More information about the gmsh mailing list