[Gmsh] R: Slice 3D to get 2D geometry

[Don Van Kerkhoven]

Make sure you also have the "component8" file in the same directory :

 

https://gitlab.onelab.info/gmsh/gmsh/-/blob/master/demos/boolean/component8.
step

 

It's required at this line 

// load volume(s) from step file

v() = ShapeFromFile("component8.step");

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://onelab.info/pipermail/gmsh/attachments/20200305/c68de2d5/attachment.html>