[Gmsh] question

Christophe Geuzaine cgeuzaine at uliege.be
Mon Aug 24 11:00:30 CEST 2020



> On 20 Jul 2020, at 10:28, Jean-François Remacle <jean-francois.remacle at uclouvain.be> wrote:
> 
> hello
> 
> gmsh has not (yet) that capability
> 

Note that for geometries created with the built-in geometry kernel, you can extrude the geometry along the surface mesh normals. This can provide an alternative for simple geometries: see e.g. https://gitlab.onelab.info/gmsh/gmsh/-/blob/master/benchmarks/extrude/sphere_boundary_layer.geo

Christophe

> JF
> 
>> Le 18 juil. 2020 à 19:05, George Bourantas <george.bourantas at gmail.com> a écrit :
>> 
>> Hi All,
>> 
>> How to generate a tetrahedral mesh with boundary layers?
>> 
>> Thank you in advance.
>> 
>> G.
>> _______________________________________________
>> gmsh mailing list
>> gmsh at onelab.info
>> https://eur03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fonelab.info%2Fmailman%2Flistinfo%2Fgmsh&data=02%7C01%7Cjean-francois.remacle%40uclouvain.be%7C293104fe733e4444fcd008d82b3fb908%7C7ab090d4fa2e4ecfbc7c4127b4d582ec%7C0%7C0%7C637306900442035546&sdata=YfhIzsSyiaf7BQx3Her0gU0IauD7BuCD8Q4NVfTb9NI%3D&reserved=0
> 
> ------------------------------------------------------------------
> Prof. Jean-Francois Remacle
> Universite catholique de Louvain (UCL)
> Ecole Polytechnique de Louvain (EPL) - Louvain School of Engineering
> Institute of Mechanics, Materials and Civil Engineering (iMMC)
> Center for Systems Engineering and Applied Mechanics (CESAME)
> Tel : +32-10-472352 -- Mobile : +32-473-909930 
> 
> 
> 
> 
> 
> 
> 
> _______________________________________________
> gmsh mailing list
> gmsh at onelab.info
> http://onelab.info/mailman/listinfo/gmsh

— 
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science 
http://www.montefiore.ulg.ac.be/~geuzaine






More information about the gmsh mailing list