<div dir="ltr">Dear all,<div><br></div><div>I am trying to generate a CFD mesh with a prismatic sub layer based on an STL as the only input. Attached is the corresponding STL (a wing) and the geo file as I prepared it up to now.</div><div><br></div><div>Reading the geo file in GMSH gui and hitting Mesh->3D does not produce the desired output, and I dont know whats going wrong.. The volume is meshed, and the wing surface boundary layer is meshed, but the two dont connect.</div><div><br></div><div>The STL consists of only one surface. Apparently, in the GMSH mesh generation process, GMSH tries to remesh the STL surface, but it does not succed.</div><div>I have tried to generate a remeshable surface from the STL via all sorts of tricks described in many previous posts, but I cant get it to work..</div><div><br></div><div>Maybe someone can help with this problem, would be really great and save me a lot of time..</div><div><br></div><div>Thank you very much in advance!</div><div>Kind regards,</div><div><br></div><div>Johannes</div><div><br></div></div>