Point (1) = { 0, 0, 0, 0.2 };
Point (2) = { 0, 1, 0, 0.2 };
Point (3) = { 1, 1, 0, 0.2 };
Point (4) = { 1, 0, 0, 0.2 };
Point (5) = { 1, 0, 1, 0.2 };
Point (6) = { 0, 0, 1, 0.2 };
Point (7) = { 1, 1, 1, 0.2 };
Point (8) = { 0, 1, 1, 0.2 };

Line (1) = { 1, 2 };
Line (2) = { 2, 3 };
Line (3) = { 1, 4 };
Line (4) = { 4, 5 };
Line (5) = { 4, 3 };
Line (6) = { 3, 7 };
Line (7) = { 2, 8 };
Line (8) = { 1, 6 };
Line (9) = { 6, 5 };
Line (10) = { 5, 7 };
Line (11) = { 2, 4 };
Line (12) = { 4, 6 };
Line (13) = { 3, 5 };
Line (14) = { 2, 7 };
Line (15) = { 8, 7 };
Line (16) = { 1, 8 };
Line (17) = { 6, 8 };
Line (18) = { 5, 8 };

Physical Curve (1) = { 1 };
Physical Curve (2) = { 3 };
Physical Curve (3) = { 8 };
Physical Curve (4) = { 2 };
Physical Curve (5) = { 7 };
Physical Curve (6) = { 5 };
Physical Curve (7) = { 6 };
Physical Curve (8) = { 4 };
Physical Curve (9) = { 9 };
Physical Curve (10) = { 10 };
Physical Curve (11) = { 17 };
Physical Curve (12) = { 15 };

Curve Loop (1) = { -3, 1, 11 };
Curve Loop (2) = { -11, 2, -5 };
Curve Loop (3) = { 3, 12, -8 };
Curve Loop (4) = { 4, -9, -12 };
Curve Loop (5) = { 5, 13, -4 };
Curve Loop (6) = { 6, -10, -13 };
Curve Loop (7) = { -2, 14, -6 };
Curve Loop (8) = { 7, 15, -14 };
Curve Loop (9) = { -1, 16, -7 };
Curve Loop (10) = { 8, 17, -16 };
Curve Loop (11) = { 9, 18, -17 };
Curve Loop (12) = { 10, -15, -18 };

Plane Surface (1) = { 1 };
Plane Surface (2) = { 2 };
Plane Surface (3) = { 3 };
Plane Surface (4) = { 4 };
Plane Surface (5) = { 5 };
Plane Surface (6) = { 6 };
Plane Surface (7) = { 7 };
Plane Surface (8) = { 8 };
Plane Surface (9) = { 9 };
Plane Surface (10) = { 10 };
Plane Surface (11) = { 11 };
Plane Surface (12) = { 12 };

Physical Surface (1) = { 1, 2 };
Compound Surface { 1, 2 };
// Physical Surface (2) = { 3, 4 };
// Compound Surface { 3, 4 };
// Physical Surface (3) = { 5, 6 };
// Compound Surface { 5, 6 };
// Physical Surface (4) = { 7, 8 };
// Compound Surface { 7, 8 };
// Physical Surface (5) = { 9, 10 };
// Compound Surface { 9, 10 };
// Physical Surface (6) = { 11, 12 };
// Compound Surface { 11, 12 };

Surface Loop    (1) = { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 };

Volume          (1) = { 1 };
Physical Volume (1) = { 1 };

Mesh 3;
