[Getdp] issue computation 3D magnetostatic

Christophe Geuzaine cgeuzaine at ulg.ac.be
Thu Mar 6 06:56:29 CET 2014


On 05 Mar 2014, at 19:53, Frederic Trillaud <ftrillaudp at pumas.ii.unam.mx> wrote:

> Dear all,
> 
> I have some issue dealing with 3D magneto-static results. The geometry
> is somewhat symmetrical and smooth. However, the results show unexpected
> "random" peaks in the magnetic flux density.
> 
> I am joining the mesh (generated in Salome using Netgen and converted by
> gmsh) and the *pro file in the attached zip file.
> 
> Someone has some idea what I may have done wrong.
> 

Hi Frédéric,

There are quite a few very bad quality tetrahedra in the mesh (quality < 1e-6). This is most probably the cause of the problem.

Christophe

> Best,
> 
> Frederic
> <MailingList.zip>_______________________________________________
> getdp mailing list
> getdp at geuz.org
> http://www.geuz.org/mailman/listinfo/getdp

-- 
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science 
http://www.montefiore.ulg.ac.be/~geuzaine