[Getdp] Issue with Example: Magnetometer

michael.asam at infineon.com michael.asam at infineon.com
Tue Nov 18 08:19:13 CET 2014

Hi Mikail,

I've just simulated your file with the default values. Both geometries are solved
but the mesh for the duplicated geometry is not structured and quite coarse.
I suppose the different results are due to the different mesh.
Here are two screenshots:
[cid:image001.png at 01D00308.55FE3850]
[cid:image002.png at 01D00308.55FE3850]


From: getdp [mailto:getdp-bounces at ace20.montefiore.ulg.ac.be] On Behalf Of Mikail Ansari
Sent: Friday, November 14, 2014 3:20 PM
To: getdp at geuz.org
Subject: [Getdp] Issue with Example: Magnetometer

I was trying to duplicate the Magnetometer example from the Onelab/GetDP website.

I duplicated the geometry.  I also assigned the physical geometry names.
When solving: only the magnetometer example 1 shows any results.
i.e. the duplicated geometry is not solved.

I have attached the files.  Could you advise me?

Mikail M. A. Ansari
Msc, BSc (Electrical Engineering)

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.geuz.org/pipermail/getdp/attachments/20141118/ccc84623/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 44880 bytes
Desc: image001.png
URL: <http://www.geuz.org/pipermail/getdp/attachments/20141118/ccc84623/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.png
Type: image/png
Size: 70653 bytes
Desc: image002.png
URL: <http://www.geuz.org/pipermail/getdp/attachments/20141118/ccc84623/attachment-0001.png>