[Getdp] solution not propagating from magnets in 3D magnetostatic problem with induction

Danny Holstein dgholstein at embarqmail.com
Sun Apr 3 22:48:02 CEST 2016


All, 

I can use some help debugging the attached GetDP problem. I started from the force example but am replacing the geometry with a STP geometry from a magnetron, which also includes induction (CRS, cold rolled steel). 

As referred to in the subject line, the solution just seems to terminate at the magnet surface boundary. Any help would be appreciated. 

Regards, 
Dan 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://onelab.info/pipermail/getdp/attachments/20160403/e622777a/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: mag.stp
Type: application/x-kdeuser1
Size: 86056 bytes
Desc: not available
URL: <http://onelab.info/pipermail/getdp/attachments/20160403/e622777a/attachment-0001.stp>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: magnets.geo
Type: text/geo
Size: 306 bytes
Desc: not available
URL: <http://onelab.info/pipermail/getdp/attachments/20160403/e622777a/attachment-0001.geo>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: magnets.pro
Type: text/x-csrc
Size: 7857 bytes
Desc: not available
URL: <http://onelab.info/pipermail/getdp/attachments/20160403/e622777a/attachment-0001.pro>


More information about the getdp mailing list