GMSH on SGI running IRIX 6.5

Christophe Geuzaine Christophe.Geuzaine at ulg.ac.be
Mon Mar 20 14:17:46 CET 2000


"Makky S. Jaya" wrote:
> 
> Christophe Geuzaine wrote:
> > Maybe your machine is 32 bits? Here is an executable built by using the
> > native CC compiler with the -o32 flag. Please tell me if it works: I'll
> > change the version on the web site consequently.
> 
> I think you have right. It seems the linked dynamic libraries was
> well read and hence works. But it still reports the following:
> 
>      [13:59]iagjaya at iagsg10:~/bin> gmsh-IRIX
>      Couldn't allocate white for glo
> 

OK, this is due to the overlay mechanism (which is still somewhat
experimental). Try to run gmsh with '-noov' (no overlay visual). If this
works, I'll suppress the overlay stuff from all web versions until it
works better...

> For your interest, I tried the gmsh-IRIX64 on two SGI machines: Indigo 2
> Impact and Indy. The latter is the 32 bits machine. The report was that
> I sent you. On Indigo 2 Impact (I believe this is 64 bits machine) the
> report of executing gmsh-IRIX64 was the same as executing gmsh-IRIX on
> Indy.
> 
> Best regards,
> Makky

-- 
Christophe Geuzaine

Tel: +32-(0)4-366.37.10    mailto:Christophe.Geuzaine at ulg.ac.be
Fax: +32-(0)4-366.29.10    http://www.montefiore.ulg.ac.be/~geuzaine/