[Gmsh] Again 2D meshing problem

[Colignon David]

Hi,

in your definition of plane surface 108 :

Plane Surface(108) = {107,106, 107};

Line Loop 107 appears two times ...

With

Plane Surface(108) = {107,106};

it works very well in 2D

Cheers,

Dave

-- 
David Colignon, Ph.D.
ELAP - Service d'Electricité Appliquée
Institut Montefiore B28
Université de Liège
4000 LIEGE - BELGIQUE
Tél: +32 (0)4 366 37 32
Fax: +32 (0)4 366 29 10
http://elap.montefiore.ulg.ac.be

> hello,
>
> well, after trying several things out i am stuck again trying to do the
> meshing for a 3D volume. abviously the 2D meshing doesn't work properly
> again. i'm using gmsh 1.59 on a suse linux 9.2. here with the attatched
> .geo file i tried two ways: straight forward do the meshing, which ends in
> the loop (see messages.txt).
> so i tried the triangles algorythm and the netgen algo. but both lead to a
> complete break-down (see .gmsh-errors). now what? no 2D mesh means no 3D
> mesh :(. and the geo file is about the simplest i could come up with.
>
> bernhard_______________________________________________
> gmsh mailing list
> gmsh at geuz.org
> http://www.geuz.org/mailman/listinfo/gmsh
>


-- 
David Colignon, Ph.D.
ELAP - Service d'Electricité Appliquée
Institut Montefiore B28
Université de Liège
4000 LIEGE - BELGIQUE
Tél: +32 (0)4 366 37 32
Fax: +32 (0)4 366 29 10
mailto:David.Colignon at ulg.ac.be
http://elap.montefiore.ulg.ac.be