[Gmsh] creating layers when imported geometry.

bhargav.patel at power.alstom.com bhargav.patel at power.alstom.com
Sat Jun 23 13:10:53 CEST 2007

yes i have tried with the document. But again to remind you i hav imported 
the geometry made in proe in STEP format. Hence i dont finde the surface 
definition as per the syntax. Also i dont have the id and password to 
access the second  link you sent me.

Bhargav Patel

"Kubicek Bernhard" <Bernhard.Kubicek at arsenal.ac.at>  
06/23/2007 01:30 PM

Bhargav Patel/INBDQ01/Power/ALSTOM at GA, <gmsh at geuz.org>

RE: [Gmsh] creating layers when imported geometry.

have you tried reading the manual at
http://geuz.org/gmsh/doc/texinfo/gmsh.html ?
In the tutorials, there are examples..
At http://geuz.org/gmsh/wiki/FrontPage there are some further, 
self-sustained geo files.
Your questions are not very concrete, I have to state. The reason that 
there is a manual probably is that the developers don't want to explain 
things over and over again.

Still, I wish you good results with Gmsh,
very nice greetings,
 Bernhard, nearly at aachen

-----Original Message-----
From: gmsh-bounces at geuz.org on behalf of bhargav.patel at power.alstom.com
Sent: Sat 6/23/2007 6:06 AM
To: gmsh at geuz.org
Subject: [Gmsh] creating layers when imported geometry.

hi all,
i have imported a geometry in STEP format. Now i want to mesh it by
creating layers. Can any one help me on this.

Bhargav Patel

With Alstom, preserve the environment. Is printing this email really
necessary ?

CONFIDENTIALITY : This  e-mail  and  any attachments are confidential and
may be privileged. If  you are not a named recipient, please notify the
sender immediately and do not disclose the contents to another person, use
it for any purpose or store or copy the information in any medium.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20070623/77c8717f/attachment.html>