[Gmsh] Extrude point numbers

Laurent Schwaederle l.schwaederle at laposte.net
Fri Jun 6 00:16:51 CEST 2008


Michael Grant a écrit :
> Hello all,
>
> I am trying to modify the Gmsh and Getdp example of "Torus3d", and while it is
> explicitly listed as a Getdp example my query is with the geometry of the problem.
>
> As I understand it, the torus is formed by specifying four points then linking
> the points together with four lines which are then rotationally extruded
> around a line-point combination.  The lines are combined to form a line loop
> which is then defined as a "Plane surface" and finally defined as a "Physical
> surface" and assigned the number 66.
>
> My query is as follows: around line 100 in torus3d.geo is the statement
> Physical Surface(79) = {70,74,78,66};
>
> And in torus3d.pro the coil region is assigned number 79.
>
> While I can see the origin of the number 66 in the assignment of Physical
> Surface(79), where do the surfaces 70, 74 and 78 arise from?
>
> How could one query the geometry to find this out.  I have tried the "inspect"
> mode with no luck.
>
> Your advice would be greatly appreciated.
>
> Kind regards, Michael Grant.
>
>
>
> <html><p><font face = "verdana" size = "0.8" color = "navy">This communication is intended for the addressee only. It is confidential. If you have received this communication in error, please notify us immediately and destroy the original message. You may not copy or disseminate this communication without the permission of the University. Only authorized signatories are competent to enter into agreements on behalf of the University and recipients are thus advised that the content of this message may not be legally binding on the University and may contain the personal views and opinions of the author, which are not necessarily the views and opinions of The University of the Witwatersrand, Johannesburg. All agreements between the University and outsiders are subject to South African Law unless the University agrees in writing to the contrary.</font></p></html>
> _______________________________________________
> gmsh mailing list
> gmsh at geuz.org
> http://www.geuz.org/mailman/listinfo/gmsh
>
>
>