[Gmsh] C++ IDE for compiling Gmsh under Windows XP

[MGlocken at aol.com]

Hi Prakash,
 
I have spend a bit of time to think about your answer and made some tests.  
You need to know, that I am a C++ beginner.
 
I have tried your example and it works after commenting out the lines for  
boost, because I haven´t installed it.
 
Next I have copied the file TestProject.dev to the root directory of my  Gmsh 
sources. In this file I´ve changed the path to main.cpp:
 
...
[Unit1]
FileName=fltk/main.cpp
...
 
I have also changed the name of variables.in to variables, so that this  file 
will be found now when makefile runs.
 
Then I opened this project file in Dev C++ and started compilation. This is  
the compiler output:
 
---------------------------------------------
Compiler: Default compiler
Führt  make... aus
make.exe -f  "Makefile"  all
"********************************************************************"
 
"Please configure Gmsh by running ./configure"
 
"For help, type ./configure --help"
 
"********************************************************************"
 
make.exe: *** [variables] Error 1
 
Ausführung beendet
---------------------------------------------
 
What´s wrong?
 
I did not run ./configure. How can I do this under Windows?
 
 
 
Greetings,

Michael  Glockenmeier

----------------------------------------------
Fa.  Michael Glockenmeier
Dipl.-Ing. Michael Glockenmeier
Hauptstr. 55  c
D-86926 Greifenberg
Germany

Tel ++49 (0) 8192/933 185
Fax ++49  (0) 8192/933 186
Email _mglocken at aol.com_ (mailto:mglocken at aol.com) 

Visit my site:  _www.femcfd.com_ (http://www.femcfd.com/) 

---------------------------------------------



   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20080628/d03f5941/attachment.html>